Haltech Elite ECU series brings the art of engine management to a whole new level. The Elite series offers preparators and tuning and high-performance enthusiasts worldwide innovative technology.
SUITS: Universal 1-12 cylinder or 2 rotor applications.
INCLUDES: Elite 1500 ECU with DBW and Race Functions. Premium Universal Wire-In Harness. Firewall grommet, moulded 6 power circuit Haltech fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits. Waterproof USB cap, USB programming cable and USB Software Key.
- 2 x dedicated engine position inputs with extensive trigger type support
- Up to 45 channels of Input & Output (I/O) expansion (via CAN)
- USB laptop communication (Windows)
- ESP Calibration Software - intuitive and easy to use
ECU functions
- Drive by Wire Throttle Control (DBW).
- Low Impedance Injector control with Programmable Injector Peak and Hold Currents & Programmable peak time.
- Flex Fuel support (Direct sensor input) - Tune your engine's boost, fuel, and ignition by ethanol content.
- Flexible tuning setup for Petrol (Gasoline), Methanol, and Ethanol.
- Closed Loop O2 Control - Dual bank control for precise tuning (With optional external CAN O2 Wideband Controller Kit).
- Knock Control - Synchronised to engine position with high speed digital filtering for accurate detection.
- Variable cam control - Independently control up to 4 camshafts.
- Closed Loop Idle Speed Control with learning for consistent idle stability.
- Long term learning (Auto tune) on fuel, ignition, cam, boost & idle control maps (up to 4D).
- On-board data logging - Up to 40 channels of logging at sample rates up to 5ms (200Hz) with 2MB of internal memory.
- Laptop data logging - Data log all available channels directly to your laptop's hard drive for both tuning and diagnostics.
- Dual CAN Bus communication for Haltech Dashes and expansion devices. Supports OEM CAN & OBDII. View live engine data & set/clear diagnostics trouble codes.
- 1-4 injection stages with individual injector flow rates per injector.
- Anti-Lag/Rotational idle for closed course racing, rally, circuit, or drift. Build and maintain boost during closed throttle conditions.
- Rolling Anti-Lag. Lock to your current (or pre-set) RPM or road speed for roll racing or pit lane limiting.
- Launch Control. Control your engine's power delivery, RPM & boost for consistent performance at the start line.
- Traction Control. Control your engine's power output via mappable front vs rear axle or individual wheel speed slip.
- 2 x dedicated engine position inputs with extensive trigger type support
Harness overview
Ideal for dedicated race cars, engine swaps, and custom wiring jobs. The Universal Wire-in Harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color coded and clearly labelled. Connect your Haltech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go!
Color coded and labelled wires that match the detailed wiring diagram for a confusion free construction process.
The wiring diagram is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-150904
1 Item
Here you can add custom original content(text, images, videos and more) for each product page.
Plug and Pins Only - Matching Set of Deutsch DTM-2Connectors (7.5 Amp)
DESCRIPTION
INCLUDES: Male Plug, Female Receptacle/Socket, Wedgelocks, Seals, Male & Female Pins.
Warning
All GMC Racing...
HALTECH Elite 2500 GM GEN III LS1 & LS6(DBW Retrofit Ready) Terminated Harness
DESCRIPTION
INJECTOR CONNECTOR: Bosch EV1 (as per factory)SUITS: Retrofit of a GEN IV LS2/3 DBW throttlebody....
Haltech CAN Cable8 pin Black Tyco to 8 pin Black TycoLENGTH: 1800mm (72")
DESCRIPTION
LENGTH: 1800mm (72")
Warning
All GMC Racing items that involve increases in power greater than those required...
HALTECH Linear Position Sensor - 1/2" - 200mm Travel
DESCRIPTION
LENGTH: Between Mounting Holes (Closed) 317mm.
SUITS: All ECU's with spare AVI.
INCLUDES: 1 x Sensor, 1 x Opposing Connector Set....
HPI4 - High Power Igniter - 15 Amp Quad ChannelFlying Lead KitLENGTH: 2.0m (78")
DESCRIPTION
The Haltech High Power Igniter is capable of driving up to 15 Amps per channel, allowing ignition...
HALTECH Fuel Level Sender Signal Conditioner
DESCRIPTION
OUTPUTS: Filters a resistive signal for use with an Analogue Voltage Input (AVI).INCLUDES: HT-031016 - Matching Set of Deutsch DTM 4...
HALTECH V8 GM/Chrysler Hemi Small/Big Block 8 x IndividualHigh Output IGN-1A Inductive Coil Harness
DESCRIPTION
SUITS: A direct Plug 'n' Play solution to add 8 individual high output IGN-1A...
HALTECH Elite 2500 + Nissan Patrol Y60 (TB42) Plug 'n' Play Adaptor Harness Kit
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for Nissan Patrol/Safari Y60 and Y61 with automatic...
HALTECH ELITE 2000 ECU
DESCRIPTION
OUTPUTS: Up to 8 injector and 8 ignition.
SUITS: Universal 1-12 cylinder or 2-4 rotor applications.
INCLUDES: Elite 2000 ECU, USB programming cable and USB...
CAN ADAPTOR LOOM - DT-4 to DTM-4
OVERVIEW
LENGTH: 200mm
SUITS: CAN Keypad 2 x 4 and 3 x 5
INCLUDES: 1 x HT-130045 - Adaptor Harness
NOTES: CAN Cable - DT-4 to DTM-4 Adaptor- Suits CAN Keypad -...
Quad Channel OEM Igniter (DUMB)
DESCRIPTION
INCLUDES: Mounting bracket, thermal paste and matching plugs and pins.
Warning
All GMC Racing items that involve increases in power greater than those...