Haltech Elite ECU series brings the art of engine management to a whole new level. The Elite series offers preparators and tuning and high-performance enthusiasts worldwide innovative technology.
SUITS: Universal 1-12 cylinder or 2 rotor applications.
INCLUDES: Elite 1500 ECU with DBW and Race Functions. Premium Universal Wire-In Harness. Firewall grommet, moulded 6 power circuit Haltech fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power curcuits, USB programming cable and USB Software Key.
- 2 x dedicated engine position inputs with extensive trigger type support
- Up to 45 channels of Input & Output (I/O) expansion (via CAN)
- USB laptop communication (Windows)
- ESP Calibration Software - intuitive and easy to use
ECU functions
- Drive by Wire Throttle Control (DBW).
- Low Impedance Injector control with Programmable Injector Peak and Hold Currents & Programmable peak time.
- Flex fuel support (Direct sensor input) - Tune your engine's boost, fuel, and ignition by ethanol content.
- Flexible tuning setup for Petrol (Gasoline), Methanol, and Ethanol.
- Closed Loop O2 Control - Dual bank control for precise tuning (With optional external CAN O2 Wideband Controller Kit).
- Knock Control - Synchronised to engine position with high speed digital filtering for accurate detection.
- Variable cam control - Independently control up to 4 camshafts.
- Closed Loop Idle Speed Control with learning for consistent idle stability.
- Long term learning (Auto tune) on fuel, ignition, cam, boost & idle control maps (up to 4D).
- On-board data logging - Up to 40 channels of logging at sample rates up to 5ms (200Hz) with 2MB of internal memory.
- Laptop data logging - Data log all available channels directly to your laptop's hard drive for both tuning and diagnostics.
- Dual CAN Bus communication for Haltech Dashes and expansion devices. Supports OEM CAN & OBDII. View live engine data & set/clear diagnostics trouble codes.
- 1-4 injection stages with individual injector flow rates per injector.
- Anti-Lag/Rotational idle for closed course racing, rally, circuit, or drift. Build and maintain boost during closed throttle conditions.
- Rolling Anti-Lag. Lock to your current (or pre-set) RPM or road speed for roll racing or pit lane limiting.
- Launch Control. Control your engine's power delivery, RPM & boost for consistent performance at the start line.
- Traction Control. Control your engine's power output via mappable front vs rear axle or individual wheel speed slip.
- 2 x dedicated engine position inputs with extensive trigger type support
Harness overview
Ideal for dedicated race cars, engine swaps, and custom wiring jobs. The Universal Wire-in Harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color coded and clearly labelled. Connect your Haltech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go!
Color coded and labelled wires that match the detailed wiring diagram for a confusion free construction process.
The wiring diagram is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-150905
Here you can add custom original content(text, images, videos and more) for each product page.
HALTECH ECU Pins - AMP Superseal
DESCRIPTION
SUITS: 26 Pin, 2 Row and 26/34 Pin, 4 Row AMP Range (E6X)
INCLUDES: Pack of 10 Pins.
Warning
All GMC Racing items that involve increases in power...
HALTECH PD16 PDM
DESCRIPTION
SUITS: Compatible with Haltech Elite and Nexus ECUs ONLY Does not function as a stand-alone PDM.
INCLUDES: 1 x Haltech PD16, 1 x SurLok 120A Connector Red, 1 x USB Key,...
HALTECH Elite 1500 + Mitsubishi EVO 4-8 (5 SPEED) Plug'n'Play Adaptor Harness Kit
DESCRIPTION
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech...
LSU4.9 WIDEBAND HARDWARE PACK
DESCRIPTION
SUITS: NEXUS SeriesINCLUDES: 1 x Bosch LSU 4.9 Sensor, 1 x HT-010726 - Adaptor Harness, 1 x Weldable BungNOTES: Plug and Play with NEXUS Series...
HALTECH Elite 1500 + Plug'n'Play adapting harness kit for FORD FOCUS RS MK1
DESCRIPTION
If you want to install the Haltech Elite 1500 ECU on your Ford Focus RS mk1, this is the right product for...
HALTECH Crimping Tool Suits DTP Series Solid Contacts
DESCRIPTION
SUITS: DTP Series Solid Contacts and Cables sizes 2.05mm2 to 3.3mm2.
INCLUDES: 1 x DTP Crimping tool.
NOTES: Use with Solid Barrell...
HALTECH Elite 550 Basic Universal Wire-in Harness
DESCRIPTION
LENGTH: 2.5m (8’)
NOTES: Does not include fuse and relay box.
Harness overview
Ideal for dedicated race cars, engine swaps, and custom...
HALTECH ELITE RACE EXPANSION MODULE (REM)
DESCRIPTION
OUTPUTS: Up to 8 injectors and auxiliary I/O.
SUITS: Universal 1-12 cylinder or 2-4 rotor applications. Up to 16 sequential injector...
HALTECH Elite 1000/1500 Nissan Silvia S13 and 180SX (SR20DET) Plug 'n' Play Adaptor Harness
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for Nissan Silvia S13 and 180SX...