If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side that plug straight into the factory harness.
Simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
Quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
Guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
ECU overview
Haltech's Elite 1500 ECU takes the art of engine calibration to a whole new level. Featuring a robust environmentally sealed case, drive by wire throttle control, intake and exhaust cam control, short term and long term map learning, knock control, and much more, the Elite 1500 ECU provides engine calibrators the tools they need to get the job done right. Alongside the Elite 1500 ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user friendliness never seen before in an engine control package. Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide.
Supports 1 to 12 cylinder engines
2 rotor engines
Normally aspirated or forced induction
Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP), or Mass Air Flow (MAF)
Staged, sequential, semi sequential, batch or multipoint injection patterns
Distributor ignition systems, multi-coil systems, expand CDI range, or Haltech Multiplex CDI systems
Connect to a wide range of display dashes and expansion devices via CAN
2 x Dedicated Engine Position Inputs with extensive trigger type support
Up to 45 channels of Input & Output (I/O) expansion (via CAN)
USB Laptop communication (Windows)
ESP Calibration Software - Intuitive and easy to use
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-150941
Here you can add custom original content(text, images, videos and more) for each product page.
HALTECH 150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm)
DESCRIPTION
Motorsport Pressure sensor must not be mounted directly into the fuel rail or engine block,...
HALTECH Elite 750 Basic Universal Wire-in Harness
DESCRIPTION
LENGTH: 2.5m (8’)
NOTES: Does not include fuse and relay box.
Harness overview
Ideal for dedicated race cars, engine swaps, and custom...
Power Relay 30A 5 Pin
DESCRIPTION
SUITS: Haltech Fuse Box.NOTES: No mounting tab.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of...
HALTECH Bosch 74mm Electronic Throttle Body - Includes connector and pins
DESCRIPTION
DIAMETER: 74mm
SUITS: Nexus and Elite VCU's and ECU's that support Drive by Wire Throttle Control (DBW)....
TCA2 - Dual Channel Thermocouple Amplifier(CAN ID - Box B)
DESCRIPTION
As supplied this product is direct Plug 'n' Play compatible with an Elite ECU CAN port, Elite ECU Harness CAN connector or...
HALTECH Linear Position Sensor - 1/2" - 200mm Travel
DESCRIPTION
LENGTH: Between Mounting Holes (Closed) 317mm.
SUITS: All ECU's with spare AVI.
INCLUDES: 1 x Sensor, 1 x Opposing Connector Set....
HALTECH 1/4" Open Tip Thermocouple
DESCRIPTION
LENGTH: 1/4 " 1.52m (60")SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier.INCLUDES: Mini K Type...
Haltech iC-7 Stand-Alone "Classic" Kit
DESCRIPTION
SIZE: 7in
SUITS: Perfect for old-school hot rods, mechanically injected muscle, carbureted classics and everything in between, the Haltech...
HALTECH Linear Position Sensor - 1" - 150mm Travel
DESCRIPTION
LENGTH: Between Mounting Holes (Closed) 277mm.
SUITS: All ECU's with spare AVI.
INCLUDES: 1 x Sensor, 1 x Opposing Connector Set....
Haltech Elite CAN CableDTM-4 to 8 pin Black TycoLENGTH: 3600mm (144")
DESCRIPTION
LENGTH: 3600mm (144")
Warning
All GMC Racing items that involve increases in power greater than those required by...
1/4" Mild Steel Weld-on Base Only
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for...
HALTECH Nexus LS 4 Pin Delco Alternator Harness
DESCRIPTION
LENGTH: 200mm.
NOTES: Harness is fitted with a 470R resistor to excite the alternator in place of a charge indicator light. Terminate to...