This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle. Fully programmable systems allow you to extract all the performance from your engine.
SUITS: Plug 'n' Play replacement of the factory ECU for Honda Integra DC5/Acura RSX 05-06. Manual transmission only. (Does not support factory multiplexed coolant temperature gauge, battery light and AC request - Please see the product quick start guide for further information).
INCLUDES: Injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
NOTES: Does not support factory multiplexed coolant temperature gauge, battery light and AC request - Please see the quick start guide for further information. Elite 1000 ECU does NOT support the factory intake runner control & check engine light. Please use the Elite 1500 if these functions are required.
Harness overview
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
A simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-140961
Here you can add custom original content(text, images, videos and more) for each product page.
HALTECH 1/4" Open Tip Thermocouple
DESCRIPTION
LENGTH: 1/4 " 1.07m (42")SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier.INCLUDES: Mini K Type...
HALTECH Elite 550 ECU + Plug and Pin Set
DESCRIPTION
LENGTH: 5.0m (16')
OUTPUTS: Up to 4 injector and 4 ignition.
SUITS: Universal 1-8 cylinder or 2 rotor applications.
INCLUDES: 1 x Elite...
Thermal Paste - Suits all OEM ignition Igniters
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are...
HALTECH Plug and Pins Only - 32 Pin Tyco
DESCRIPTION
SUITS: Sprint 500 & RE ECU Platinum Interceptor (non-waterproof version)INCLUDES: Pack of 32 Pins.
Warning
All GMC Racing items that...
HPI4 - High Power Igniter - 15 Amp Quad ChannelFlying Lead KitLENGTH: 2.0m (78")
DESCRIPTION
The Haltech High Power Igniter is capable of driving up to 15 Amps per channel, allowing ignition...
HALTECH Elite 2500 + Subaru WRX MY06-10 Plug 'n' Play Adaptor Harness Kit
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for Subaru WRX MY06-10 STI MY06-07 2.5 Litre with DENSO ECU...
HPI8 - High Power Igniter - 15 Amp Eight ChannelFlying Lead KitLENGTH: 2.0m (78")
DESCRIPTION
The Haltech High Power Igniter is capable of driving up to 15 Amps per channel, allowing ignition...
HALTECH Linear Position Sensor - 1/2" - 50mm Travel
DESCRIPTION
LENGTH: Between Mounting Holes (Closed) 167mm.
SUITS: All ECU's with spare AVI.
INCLUDES: 1 x Sensor, 1 x Opposing Connector Set....
IO 12 Expander - 12 Channel withFlying Lead Harness Kit (CAN ID - Box A)LENGTH: 2.5m (8')
DESCRIPTION
The Haltech IO Expander 12 allows the user the ability to increase the functionality of their...
HALTECH Pro Tuner "Knock Ears" Kit Dual Channel 2014 Spec
DESCRIPTION
INCLUDES: Includes 2 sensors.
Warning
All GMC Racing items that involve increases in power greater than those required by the...
1/4" Stainless Steel Weld-on Base Only
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only...
BOSCH 145 PSI FLUID PRESSURE AND TEMPERATURE SENSOR
DESCRIPTION
THREAD: M10 x 1.0INCLUDES: Includes: Matching plug and pins, M10 x 1.0 to 1/8NPT adaptor.NOTES: Used to measure fluid pressure and...
This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle. Fully programmable systems allow you to extract all the performance from your engine.
