HALTECH Elite 1000/1500 Mazda Miata (MX-5) NB Plug 'n' Play Adaptor Harness
€481.90
Tax included
This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle. Fully programmable systems allow you to extract all the performance from your engine.
HALTECH Elite 1000/1500 Mazda Miata (MX-5) NB Plug 'n' Play Adaptor Harness
DESCRIPTION
SUITS: Mazda Miata (MX-5) NB ADM Special Edition (Factory Turbo), USDM Special Edition (Factory Turbo), VCT, Non-VCT (00-04 Aust, 01-05 USA). 3-plug, 3-row factory ECU. Manual transmission only.
INCLUDES: Plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
Harness overview
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
A simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-140921
Here you can add custom original content(text, images, videos and more) for each product page.
HALTECH Pins only - Female pins to suit Male Deutsch DT Series Connectors
DESCRIPTION
SUITS: Suits cable size 20AWG to 16AWG Cable.
INCLUDES: 10 x Female Pins suit DT Series Connectors.
Warning...
Haltech Elite CAN CableDTM-4 to DTM-4LENGTH: 3600mm (144")
DESCRIPTION
LENGTH: 3600mm (144")
Warning
All GMC Racing items that involve increases in power greater than those required by the highway...
Wideband Adaptor Harness - 400mm
DESCRIPTION
LENGTH: 400mmSUITS: NEXUS Series devicesINCLUDES: 1 x DTM-6 to Superseal Pins HarnessNOTES: Pre terminated with AMP superseal pins for easy installation...
HALTECH Firewall Rubber Wiring GrommetDIAMETER: 51mm (2") OD 21mm (13/16") ID
DESCRIPTION
DIAMETER: 51mm (2") OD 21mm (13/16") ID
Warning
All GMC Racing items that involve increases in power...
HALTECH iC-7 OBD-II COLOR DISPLAY DASH
DESCRIPTION
SIZE: 7in
SUITS: Most late model vehicles (approx 2008-on) with OBD-II CAN.
INCLUDES: Haltech iC-7 Display Dash, 34 Pin main connector harness,...
HALTECH V8 GM/Chrysler Hemi Small/Big Block 8 x IndividualHigh Output IGN-1A Inductive Coil and Harness Kit
DESCRIPTION
SUITS: A direct Plug 'n' Play solution to add 8 individual high output IGN-1A...
Haltech CAN Cable8 pin White Tyco to 8 pin White TycoLENGTH: 3600mm (144")
DESCRIPTION
LENGTH: 3600mm (144")
Warning
All GMC Racing items that involve increases in power greater than those...
NEXUS CAN Keypad 8 button (2x4)
VCU OVERVIEW
SUITS: NEXUS devices only
INCLUDES: 1 x 8 button keypad (2x4), 1 x Adaptor Harness DT-4 to DTM-4, 1 x DTM to DTM Cable -1200mm, 1 x Label Set, 1 x...
TCA2 - Dual Channel Thermocouple AmplifierFlying Lead HarnessLENGTH: 1.5m (3')
DESCRIPTION
LENGTH: 1.5m (3')NOTES: Only required if using the optional 0-5 V analogue outputs.
Warning
All GMC...
CAN Adaptor Loom DTM-4 to Flying Leads
DESCRIPTION
SUITS: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series Connector
INCLUDES: 1 x HT-130046 CAN Adaptor Loom...
HALTECH Elite 2000/2500 Subaru GDB WRX MY01-05 Plug'n'Play Adaptor Harness
DESCRIPTION
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play...