HALTECH 1AWG Terminated Cable Pair (2m)
HALTECH 1AWG Terminated Cable Pair (2m) DESCRIPTION LENGTH: 2m SUITS: Nexus R5. INCLUDES: 1 X 1 AWG battery cable (Red) pre-terminated with SurLok connector - 2m; 1 x 1 AWG battery cable (Black)...
Here you can add custom original content(text, images, videos and more) for each product page.
16 other products in the same category:
HALTECH 1AWG Terminated Cable Pair (2m) DESCRIPTION LENGTH: 2m SUITS: Nexus R5. INCLUDES: 1 X 1 AWG battery cable (Red) pre-terminated with SurLok connector - 2m; 1 x 1 AWG battery cable (Black)...
HALTECH ELITE CAN CABLE DTM-4 to OBDII DESCRIPTION LENGTH: 1800mm (72")NOTES: Vehicle side OBDII Connector Warning All GMC Racing items that involve increases in power greater than those...
HALTECH Elite PRO Plug-in ECUFor Ford Falcon I6 "Barra" DESCRIPTION SUITS: Ford Falcon BA (02-05), BF (05-08), FG (08-14) I6 4.0L DOHC VCT Barra engine with manual trans. Ford Falcon BF (05-08),...
HALTECH Nissan Attesa 4WD TPS Adaptor DESCRIPTION OUTPUTS: Produces the correct scaled TPS output signal required for the MFD and Attesa 4WD functions when using a standalone ECU.INCLUDES:...
HALTECH Elite 1500 + Mazda 13B S6-8 CAS with IGN-1A Ignition Terminated Harness Kit - Injector Connector: Bosch EV1 DESCRIPTION SUITS: S6/8 CAS (Crank Angle Sensor) WBC1 CAN O2 Wideband Controller...
HALTECH Elite 2000/2500 GM GEN III LS1 & LS6non DBW Terminated Harness DESCRIPTION SUITS: Factory EV1 injector connectors and common US style Delco/Bosch GM alternator connector. Pre-wired to...
HALTECH Bosch 68mm Electronic Throttle Body - Includes connector and pins DESCRIPTION DIAMETER: 68mm SUITS: Nexus and Elite VCU's and ECU's that support Drive by Wire Throttle Control (DBW)....
HALTECH Fuel Level Sender Signal Conditioner DESCRIPTION OUTPUTS: Filters a resistive signal for use with an Analogue Voltage Input (AVI).INCLUDES: HT-031016 - Matching Set of Deutsch DTM 4...
HALTECH Nexus LS 2 Pin Bosch Alternator Harness DESCRIPTION LENGTH: 200mm. NOTES: Harness is fitted with a 470R resistor to excite the alternator in place of a charge indicator light. Warning All...
HALTECH IO 12 Expander - 12 Channel (CAN ID - Box A) DESCRIPTION The Haltech IO Expander 12 allows the user the ability to increase the functionality of their Haltech ECU by using the Haltech CAN...
HALTECH Tacho Output Adaptor DESCRIPTION OUTPUTS: 1 x Coil Negative emulated signalINCLUDES: Matching Set of DTM 4 Connector plug and pinsNOTES: Requires Spare DPO on ECU Warning All GMC Racing...
HALTECH 1AWG Terminated Cable Pair (4m) DESCRIPTION LENGTH: 4m SUITS: Nexus R5. INCLUDES: 1 X 1 AWG battery cable (Red) pre-terminated with SurLok connector - 4m; 1 x 1 AWG battery cable (Black)...
HALTECH Elite 2500 + GM GEN IV LSx (LS2/LS3 etc) DBW Ready Terminated Harness Kit - Injector Connector: Bosch EV1 DESCRIPTION SUITS: Common US style Delco/Bosch GM alternator connector. Pre-wired...
HALTECH PD16 PDM + Plug and pin Set DESCRIPTION SUITS: Compatible with Haltech Elite and Nexus ECUs ONLY. Does not function as a stand-alone PDM. INCLUDES: Haltech PD16 and Plug and Pin Set to...
HALTECH Pins only - Female pins to suit Male Deutsch DTP Connectors DESCRIPTION SUITS: Suits 14 - 12 AWG Cable. INCLUDES: 10 x Female Pins suit DTP Series Connectors. Warning All GMC Racing items...
HALTECH Elite 2500 + Nissan Patrol Y60 (TB42) Plug 'n' Play Adaptor Harness Kit DESCRIPTION SUITS: Plug 'n' Play replacement of the factory ECU for Nissan Patrol/Safari Y60 and Y61 with automatic...