copy of HALTECH Elite 2000/2500 Toyota LandCruiser 80 Series Plug 'n' Play Adaptor Harness Kit
€481.90
Tax included
This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle. Fully programmable systems allow you to extract all the performance from your engine.
HALTECH Elite 2000/2500 Toyota LandCruiser 80 Series Plug 'n' Play Adaptor Harness Kit
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for MY95-97 Toyota LandCruiser 80 Series with 1FZ-FE and manual transmission only. Supports sub tank transfer system. (European delivered models please confirm your ECU pin out with Haltech before ordering) INCLUDES: Plug'n'Play Adaptor Harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins. NOTES: Spare ignition outputs can be used (via custom wiring) to convert from distributor to direct fire ignition system. (6 individual coils)
Adaptor overview
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
A simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-141249
Here you can add custom original content(text, images, videos and more) for each product page.
Elite 2500 GM GEN IV LSx (LS2/LS3 etc) DBW ReadyTerminated HarnessINJECTOR CONNECTOR: Bosch EV6 (as per factory)
DESCRIPTION
INJECTOR CONNECTOR: Bosch EV6 (as per factory)SUITS: Common US style...
HALTECH Nexus R3 Tube Mount Kit - 1.25"
DESCRIPTION
SUITS: NEXUS R3 VCU
INCLUDES: 1 x Mounting Plate, 2 x 1.25" Tube Clamps.
NOTES: Brackets are made from CNC machined 6061 Aluminum and then...
LSU4.9 Wideband Adaptor HarnessLSU4.9 to DTM6
DESCRIPTION
SUITS: NEXUS Series devicesINCLUDES: 1 x HT-010726 LSU4.9 to DTM-6 HarnessNOTES: Plug'n'Play with NEXUS series harnesses
Warning
All GMC...
HALTECH Elite 2500 + Terminated Harness Kit for Nissan RB Twin Cam With Series 2 (late) ignition type sub harness
DESCRIPTION
SUITS: Nissan RB Twin Cam RB20/25/26 with Series 2 Coils (Ignitor built...
HALTECH SurLok Connector-120A (Black) - Suits Nexus R3
DESCRIPTION
SUITS: Nexus R3
INCLUDES: 1 x 120A Black SurLok Connector
Warning
All GMC Racing items that involve increases in power greater...
HALTECH Elite 2500 Subaru WRX MY06-10 Plug'n'Play Adaptor Harness Kit
DESCRIPTION
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor...
HALTECH Pins only - Female pins to suit Male Deutsch DTP Connectors
DESCRIPTION
SUITS: Suits 14 - 12 AWG Cable.
INCLUDES: 10 x Female Pins suit DTP Series Connectors.
Warning
All GMC Racing items...
HALTECH Elite 2000 + Toyota Chaser JZX100 (1JZ-GTE)Plug 'n' Play Adaptor Harness Kit
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for Toyota Mark II/Cresta/Chaser JZX100 1JZ-GTE...
HALTECH Bosch 74mm Electronic Throttle Body - Includes connector and pins
DESCRIPTION
DIAMETER: 74mm
SUITS: Nexus and Elite VCU's and ECU's that support Drive by Wire Throttle Control (DBW)....
HALTECH PLATINUM PRO PLUG-IN ECU HONDA EP3
DESCRIPTION
If you are after a simple plug-and-play option and your car still has its original engine and wiring in it, a Plug-in ECU is the easiest and...
HALTECH 1/4" Open Tip Thermocouple
DESCRIPTION
LENGTH: 1/4 " 1.18m (46.5")SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier.INCLUDES: Mini K...
This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle. Fully programmable systems allow you to extract all the performance from your engine.
