HALTECH Elite 2000/2500 GM GEN IV LSx (LS2/LS3 etc) non DBW Terminated Harness INJECTOR CONNECTOR: Bosch EV6 (as per factory)
DESCRIPTION
INJECTOR CONNECTOR: Bosch EV6 (as per factory) SUITS: Common US style Delco/Bosch GM alternator connector. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. Manual transmission only. INCLUDES: Engine harness with fuse block and firewall grommet. NOTES: Please confirm your alternator connector (See the product quick start guide) and order an alternator adaptor if required. (HT-040090 or HT-040091) LS2 Ignition coils and harnesses are NOT included
Harness overview
The fastest and most cost effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this plug and Play product allows you to be up and running in just a few hours.
An efficient Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
The quick start guide will walk you through installation of the Haltech Plug'n'Play harness into your vehicle.
The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
Harness features
This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-141365
Here you can add custom original content(text, images, videos and more) for each product page.
HALTECH Linear Position Sensor - 1/2" - 150mm Travel
DESCRIPTION
LENGTH: Between Mounting Holes (Closed) 267mm.
SUITS: All ECU's with spare AVI.
INCLUDES: 1 x Sensor, 1 x Opposing Connector Set....
1 BAR GM MAP SENSOR
DESCRIPTION
INCLUDES: Matching plug and 3 pins.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of...
Haltech CAN Cable8 pin Black Tyco to 8 pin Black TycoLENGTH: 600mm (24")
DESCRIPTION
LENGTH: 600mm (24")
Warning
All GMC Racing items that involve increases in power greater than those required...
HALTECH SurLok Connector Set (Black + Red)
DESCRIPTION
SUITS: NEXUS R5INCLUDES: 1 x 200A Red SurLok Connector 1 x 200A Black SurLok Connector
Warning
All GMC Racing items that involve increases in...
HALTECH PD16 PDM + Plug and pin Set
DESCRIPTION
SUITS: Compatible with Haltech Elite and Nexus ECUs ONLY. Does not function as a stand-alone PDM.
INCLUDES: Haltech PD16 and Plug and Pin Set to...
HALTECH Elite 2000/2500 + Mitsubishi EVO 9 & EVO 8 MR Plug'n'Play Adaptor Harness Kit
DESCRIPTION
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech...
HALTECH 1/4" Open Tip Thermocouple
DESCRIPTION
LENGTH: 1/4 " 0.61m (24")SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier.INCLUDES: Mini K Type...
HALTECH Plug and Pins Only - Suits Bosch 150psi Fluid Pressure and Temperature Sensor
DESCRIPTION
SUITS: HT-010920 - Bosch 150psi Fluid Pressure and Temperature SensorINCLUDES: 1 X 5 Pin Plug, 5 x...
Plug and Pins Only - Matching Set of Deutsch DTM-2Connectors (7.5 Amp)
DESCRIPTION
INCLUDES: Male Plug, Female Receptacle/Socket, Wedgelocks, Seals, Male & Female Pins.
Warning
All GMC Racing...
HALTECH Elite 1500 + Nissan 200SX/Silvia S15 & S14A S2Plug 'n' Play Adaptor Harness Kit
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for Nissan 200SX/Silvia S15 (Australian...