HALTECH Platinum PRO Plug-in ECU Nissan R34 GTR Skyline
DESCRIPTION
SUITS: Nissan R34 GTR Skyline. INCLUDES: Platinum PRO Direct Plug-in ECU, Plug and pins for auxiliary I/O harness. Haltech CAN adaptor cable DTM-4 female receptacle/socket to 8 pin black Tyco 3"/75mm (used to adapt a Platinum series ECU to a DTM-4 Elite CAN system), USB programming cable and USB Software Key. NOTES: Directly accepts an input from a flex fuel sensor.
ECU OVERVIEW
If you are after a simple plug-and-play option and your car still has its original engine and wiring in it, a Plug-in ECU is the easiest and quickest solution. You simply unplug the factory ECU, and plug the Haltech ECU directly into the factory harness. Load your base map and you're ready to go!
Direct plug and play replacement of the OEM ECU, no re-wiring necessary.
Uses the car's factory sensors
Supports Sequential Injection (peak and hold) and Direct fire ignition
Windows 2000, XP, Vista, Windows 7 compatible software
Real time programming, instant hesitation free adjustment while engine is running
Fully user definable 32 x 32 mapping
Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
OBD II Code Storing & Malfunction Indicator Light (MIL) Control (through laptop only )
Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
Wideband “auto tuning†using user definable target AFR table
Flex Fuel Support
USB and CAN Communication Port
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-055106
Here you can add custom original content(text, images, videos and more) for each product page.
HALTECH Elite 2500 + Terminated Harness Kit for Nissan RB Twin Cam With Series 2 (late) ignition type sub harness
DESCRIPTION
SUITS: Nissan RB Twin Cam RB20/25/26 with Series 2 Coils (Ignitor built...
NTK Wideband Hardware Pack
DESCRIPTION
SUITS: NEXUS Series devicesINCLUDES: 1 x NTK LZA08-H5 Sensor, 1 x HT-010727 - NTK to DTM-6 Harness, 1 x Weldable BungNOTES: Plug'n'Play with NEXUS Series...
HALTECH 1/4" Open Tip Thermocouple (L. 2.44m)
DESCRIPTION
1/4" Thermocouple 2.44m (96") long - Pre-terminated with Mini K Type connector to suit TCA 2 or 4 thermocouple amplifier.
LENGTH: 2.44m...
Haltech Elite CAN cableDTM-4 to 8 pin Black TycoLENGTH: 900mm (36")
DESCRIPTION
LENGTH: 900mm (36")
Warning
All GMC Racing items that involve increases in power greater than those required by the...
HALTECH Linear Position Sensor - 1" - 250mm Travel
DESCRIPTION
LENGTH: Between Mounting Holes (Closed) 377mm.
SUITS: All ECU's with spare AVI.
INCLUDES: 1 x Sensor, 1 x Opposing Connector Set....
HALTECH V8 GM/Chrysler Hemi Small/Big Block 8 x IndividualHigh Output IGN-1A Inductive Coil Harness
DESCRIPTION
SUITS: A direct Plug 'n' Play solution to add 8 individual high output IGN-1A...
HALTECH Plug and Pins Only - Suits Bosch 150psi Fluid Pressure and Temperature Sensor
DESCRIPTION
SUITS: HT-010920 - Bosch 150psi Fluid Pressure and Temperature SensorINCLUDES: 1 X 5 Pin Plug, 5 x...
HALTECH Ford MK1 Radio Reprogramming Cable
DESCRIPTION
LENGTH: 0.8m / 2.6ft
SUITS: Elite PRO Plug-in ECU - Ford Falcon i6 "Barra"
INCLUDES: 1 x Reprogramming Cable only
NOTES: Used for...
Haltech CAN Cable8 pin Black Tyco to 8 pin Black TycoLENGTH: 900mm (36")
DESCRIPTION
LENGTH: 600mm (24")
Warning
All GMC Racing items that involve increases in power greater than those required...
HALTECH MULTI-FUNCTION CAN GAUGE SIZE: 52mm (2")
DESCRIPTION
SIZE: 52mm (2")
SUITS: Haltech Version 2 CAN bus protocol.
INCLUDES: 52mm (2") CAN Gauge, gaugeART DTM-style CAN cable - 2.5m (8ft),...
Plug and Pin Set for NEXUS R5
DESCRIPTION
SUITS: NEXUS R5
INCLUDES: 1 x AMP 34 Position Connector Key1 1 x AMP 26 Position Connector Key1 1 x AMP 34 Position Connector Key2 1 x AMP 26 Position...