If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
SUITS: Mazda Miata (MX-5) NB 1.8L Non VCT (00-04 Aus, 01-05 USA) 1.8L Factory Turbo SE (Aus), Mazdaspeed (04-05 USA) with 3-plug, 3-row factory ECU. Manual transmission only. INCLUDES: Elite 750 ECU, Plug'n'Play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin TYCO plug and pins. Waterproof USB cap, USB programming cable and software CD.
ECU overview
A simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours. The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle. The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
The Elite 750 is an entry-level ECU offering many features available on the more advanced Elite 1500/2500 at an affordable price. Featuring a robust, environmentally sealed, waterproof case, 6 fuel and 6 ignition channels, on-board data logging and flex fuel tuning the Elite 750 is a powerful, compact ECU. Alongside the Elite 750 ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user friendliness never seen before in an engine control package. Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide.
Supports 1 to 8 Cylinder engines
1 to 3 Rotor engines
Normally aspirated or forced induction
Load sensing by Throttle Position (TPS), Manifold
Pressure (MAP) or Mass Air Flow (MAF)
Staged, Sequential, semi sequential, batch or multipoint injection patterns
Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems
Connect to a wide range of display dashes and expansion devices via CAN.
Waterproof case (IP67) (with USB cover fitted)
34 position AMP connector
6 x Fuel Injection Outputs (peak and hold (0-8A peak / 0-2A hold)
6 x Ignition Outputs
2 x Dedicated Engine Position inputs with extensive trigger type support
2 x Digital Pulsed Inputs
5 x Digital Pulsed Outputs
2 x Analogue Voltage Inputs
3 x Dedicated Inputs (Throttle Position, Coolant Temperature & Air Temperature)
Internal 3Bar MAP sensor rated up to 200kPa of boost (2Bar/29psi)
Up to 45 channels of Input & Output (I/O) expansion (via CAN)
USB Laptop Communication (Windows)
On-board data logging
ESP Calibration Software - Intuitive and easy to use
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-150621
Here you can add custom original content(text, images, videos and more) for each product page.
HALTECH Pins only - Male pins to suit Female Deutsch DT Series Connectors
DESCRIPTION
SUITS: Suits 20 - 16AWG Cable.
INCLUDES: 10 x Male Terminals for DT Series Connectors.
Warning
All GMC Racing...
HALTECH Pins only - Male pins to suit Female Deutsch DTMConnectors (Size 20, 7.5 Amp)
DESCRIPTION
INCLUDES: Pack of 10 Pins.
Warning
All GMC Racing items that involve increases in power greater...
CAN Adaptor Loom DTM-4 to Flying Leads
DESCRIPTION
SUITS: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series Connector
INCLUDES: 1 x HT-130046 CAN Adaptor Loom...
HALTECH WB2 - Dual Channel CAN O2 Wideband Controller Kit
DESCRIPTION
New Haltech Elite Dual Channel wide band CAN controller, designed to connect to all Sport and Elite ECUs via Haltech CAN bus....
HALTECH 3 Bar Motorsport MAP Sensor
DESCRIPTION
A Haltech MAP sensor (Manifold Absolute Pressure) provides instantaneous pressure information to the electronic control unit (ECU) from the intake...
500 PSI "TI" Pressure SensorTHREAD: 1/8 NPT
DESCRIPTION
THREAD: 1/8 NPTINCLUDES: Matching plug and pins, -4 AN adaptor.NOTES: "TI" Pressure sensors must not be mounted directly into the fuel rail...
HALTECH Elite 2500 & 2500 T Basic Universal Wire-in Harness
DESCRIPTION
Ideal for dedicated race cars, engine swaps, and custom wiring jobs. The Universal Wire-in Harness has a set of ECU...
HALTECH 1/4" Stainless Steel Weld-on Kit
DESCRIPTION
6mm stainless steel weld-on nipple for exhaust gas temperature probe with nut and ferrule.
Warning
All GMC Racing items that involve...
HIGH OUTPUT IGN-1A INDUCTIVE COIL WITH BUILT-IN IGNITION MODULE
DESCRIPTION
INCLUDES: Matching plug and pins
Warning
All GMC Racing items that involve increases in power greater than those...
HALTECH Pins only - Male pins to suit Female Deutsch DTP Connectors
DESCRIPTION
SUITS: Suits 14 - 12 AWG Cable.
INCLUDES: 10 x Male Pins suit DTP Series Connectors.
Warning
All GMC Racing items...
HALTECH Elite 2500 + Subaru GDB WRX MY01-05 Plug'n'Play Adaptor Harness Kit
DESCRIPTION
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play...