If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
SUITS: Plug 'n' Play replacement of the factory ECU for Nissan Skyline R34 GT-T Stagea WC34 Manual transmissions only
INCLUDES: Elite 2500 ECU with DBW and Race Functions, injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin TYCO plug and pins, USB programming cable and USB software key.
ECU Overview
A simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
Haltech's Elite 2500 ECU takes the art of engine calibration to a whole new level. Featuring a robust environmentally sealed waterproof case, drive by wire throttle control, intake and exhaust cam control, short term and long term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators the tools they need to get the job done right. Alongside the Elite 2500 ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user friendliness never seen before in an engine control package. Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide.
Supports 1 to 12 Cylinder engines
2 to 4 Rotor engines
Normally aspirated or forced induction
Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF)
Staged, Sequential, semi sequential, batch or multipoint injection patterns
Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems
Connect to a wide range of display dashes and expansion devices via CAN.
2 x Dedicated Engine Position Inputs with extensive trigger type support
Up to 45 channels of Input & Output (I/O) expansion (via CAN)
USB Laptop communication (Windows)
ESP Calibration Software - Intuitive and easy to use
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use.
GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-151358
Here you can add custom original content(text, images, videos and more) for each product page.
HALTECH SurLok Connector-120A (Black) - Suits Nexus R3
DESCRIPTION
SUITS: Nexus R3
INCLUDES: 1 x 120A Black SurLok Connector
Warning
All GMC Racing items that involve increases in power greater...
HALTECH TCA4 - Quad Channel Thermocouple Amplifier (CAN ID - Box A)
DESCRIPTION
As supplied this product is direct Plug'n'Play compatible with an Elite ECU CAN port, Elite ECU Harness CAN...
HALTECH 1/4" Open Tip Thermocouple
DESCRIPTION
LENGTH: 1/4 " 1.52m (60")SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier.INCLUDES: Mini K Type...
Haltech CAN Cable8 pin Black Tyco to 8 pin Black TycoLENGTH: 2400mm (92")
DESCRIPTION
LENGTH: 2400mm (92")
Warning
All GMC Racing items that involve increases in power greater than those required...
IO 12 Expander - 12 Channel withFlying Lead Harness Kit (CAN ID - Box B)LENGTH: 2.5m (8')
DESCRIPTION
The Haltech IO Expander 12 allows the user the ability to increase the functionality of their...
HALTECH 1/4" Open Tip Thermocouple
DESCRIPTION
LENGTH: 1/4 " 0.61m (24")SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier.INCLUDES: Mini K Type...
HALTECH Plug and Pins Only - AMP 34 Pin 4 Row3 Keyway Superseal Connector
DESCRIPTION
SUITS: Elite 550/750/950 ECUs, Haltech IQ3 Street Dashes and the large connector on E8/11, PS1000/2000 and...
HALTECH Elite CAN HUB 4 Port DTM-4
DESCRIPTION
Direct Plug'n'Play compatible with an Elite ECU CAN port or Elite ECU Harness CAN connector. Combine two or more Elite CAN Hubs as required to...
Plug and Pins Only - Delphi 2 Pin GM styleAir Temp Connector (Grey)
DESCRIPTION
SUITS: HT-010200 - Air Temp Sensor - Small Thread HT-010202 - Air Temp Sensor - Large Thread HT-010204 - Air Temp...
HALTECH Plug and pins only - Male Deutsch DTP-06-4S - Black connector (25Amp)
DESCRIPTION
SUITS: Nexus R5INCLUDES: 1 x male plug 1 x wedgelock 4 x female pinsNOTES: Current Rating 25Amp
Warning...
HALTECH Elite 2500 + Nissan Patrol Y60 (TB42) Plug 'n' Play Adaptor Harness Kit
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for Nissan Patrol/Safari Y60 with automatic or manual...