If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
SUITS: Plug 'n' Play replacement of the factory ECU for Nissan Patrol/Safari Y60 with automatic or manual transmissions. (No shift re-programming/control etc) TB42E Only.
INCLUDES: Elite 2500 ECU with DBW and Race Functions, injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin TYCO plug and pins, USB programming cable and USB software key.
NOTES: Spare ignition outputs can be used (via custom wiring) to convert from distributor to direct fire ignition system. (6 individual coils).
ECU Overview
A simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
Haltech's Elite 2500 ECU takes the art of engine calibration to a whole new level. Featuring a robust environmentally sealed waterproof case, drive by wire throttle control, intake and exhaust cam control, short term and long term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators the tools they need to get the job done right. Alongside the Elite 2500 ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user friendliness never seen before in an engine control package. Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide.
Supports 1 to 12 Cylinder engines
2 to 4 Rotor engines
Normally aspirated or forced induction
Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF)
Staged, Sequential, semi sequential, batch or multipoint injection patterns
Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems
Connect to a wide range of display dashes and expansion devices via CAN.
2 x Dedicated Engine Position Inputs with extensive trigger type support
Up to 45 channels of Input & Output (I/O) expansion (via CAN)
USB Laptop communication (Windows)
ESP Calibration Software - Intuitive and easy to use
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use.
GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-151399
Here you can add custom original content(text, images, videos and more) for each product page.
Plug and Pins Only - Matching Set of Deutsch DTM-4Connectors (7.5 Amp)
DESCRIPTION
INCLUDES: Male Plug, Female Receptacle/Socket, Wedgelocks, Seals, Male & Female Pins.
Warning
All GMC Racing...
500 PSI "TI" Pressure SensorTHREAD: 1/8 NPT
DESCRIPTION
THREAD: 1/8 NPTINCLUDES: Matching plug and pins, -4 AN adaptor.NOTES: "TI" Pressure sensors must not be mounted directly into the fuel rail...
HALTECH Elite 1000/1500 Nissan 200SX/Silvia S15 & S14A S2 Plug 'n' Play Adaptor Harness
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for Nissan 200SX/Silvia S15 (Australian...
HALTECH Elite 2500 + Subaru WRX MY06-07 Plug'n'Play Adaptor Harness Kit
DESCRIPTION
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play...
Plug and Pins Only - US EV6 Type Injectors
DESCRIPTION
INCLUDES: Pack of 2 Pins.NOTES: Also suits ID1000 injectors.
Warning
All GMC Racing items that involve increases in power greater than...
Wideband Extension HarnessTo suit LSU4.9
DESCRIPTION
LENGTH: 1.2M (4ft)
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country...
Haltech CAN Cable8 pin White Tyco to 8 pin White TycoLENGTH: 900mm (36")
DESCRIPTION
LENGTH: 600mm (24")
Warning
All GMC Racing items that involve increases in power greater than those required...
HALTECH Plug and Pins Only - Matching Set of Deutsch DT-2 Connectors (DT06-8S + DT04-8P) - ( 13 Amp)
DESCRIPTION
INCLUDES: 1 x DT04-8P Connector 1 x DT06-8S Connector 2 x Wedge Locks to suit 16 x...
HALTECH Dual Crimper Set Inc 3 pin removal tools
DESCRIPTION
INCLUDES: 2 x Open Barrell Crimper tools, 3 x Removal tools.
FEATURES
Open barrel crimper tool (Red) for 30-16AWG
Open barrel...
HALTECH Split Collar Shock Sensor Mount -7/8" / 22.225mm
DESCRIPTION
LENGTH: N/A
SUITS: All Haltech Linear Position Sensors.
INCLUDES: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts....