HALTECH Elite 1500 + Mitsubishi Galant VR4 and Eclipse 1G Plug 'n' Play Adaptor Harness Kit
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for Mitsubishi Galant VR4 (Australian Delivered and JDM) Eclipse 1G Turbo (JDM and USDM) Manual transmission only. INCLUDES: Elite 1500 ECU with DBW and Race Functions, injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin TYCO plug and pins, USB programming cable and USB software key.
ECU overview
Haltech's Elite 1500 ECU takes the art of engine calibration to a whole new level. Featuring a robust environmentally sealed case, drive by wire throttle control, intake and exhaust cam control, short term and long term map learning, knock control, and much more, the Elite 1500 ECU provides engine calibrators the tools they need to get the job done right. Alongside the Elite 1500 ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user friendliness never seen before in an engine control package. Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide.
Supports 1 to 12 cylinder engines
2 rotor engines
Normally aspirated or forced induction
Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP), or Mass Air Flow (MAF)
Staged, sequential, semi sequential, batch or multipoint injection patterns
Distributor ignition systems, multi-coil systems, expand CDI range, or Haltech Multiplex CDI systems
Connect to a wide range of display dashes and expansion devices via CAN
2 x Dedicated Engine Position Inputs with extensive trigger type support
Up to 45 channels of Input & Output (I/O) expansion (via CAN)
USB Laptop communication (Windows)
ESP Calibration Software - Intuitive and easy to use
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-150942
Here you can add custom original content(text, images, videos and more) for each product page.
NEXUS R5 + UNIVERSAL WIRE-IN HARNESS KIT - 5M / 16'
DESCRIPTION
LENGTH: 5m (16')
SUITS: Racing application where advances race features, data logging and power management control is required....
Bosch - DBW Pedal Assembly
DESCRIPTION
SUITS: Nexus and Elite VCU's and ECU's that support Drive by Wire Throttle Control (DBW).
INCLUDES: DBW Pedal Assembly and matching connector and pin set...
HALTECH HPI8 - High Power Igniter - 15 Amp Eight Channel Flying Lead Loom Only LENGTH: 2.0m (78")
DESCRIPTION
The Haltech High Power Igniter is capable of driving up to 15 Amps per channel,...
HALTECH NEXUS R3 VCU
VCU OVE
SUITS: Engines with up to 8 cylinders or up to 4 rotors. Racing application where advanced race features, data logging and power management control is...
HALTECH 5 Bar "TI" MAP Sensor THREAD: 1/8 NPT
DESCRIPTION
THREAD: 1/8 NPTINCLUDES: Matching Delphi plug and 3 pins, -4 AN & 5mm hosetail adaptors.NOTES: "TI" MAP sensors must not be mounted...
Elite 2500 GM GEN IV LSx (LS2/LS3 etc) DBW ReadyTerminated HarnessINJECTOR CONNECTOR: Bosch EV6 (as per factory)
DESCRIPTION
INJECTOR CONNECTOR: Bosch EV6 (as per factory)SUITS: Common US style...
HALTECH Elite CAN HUB 4 Port DTM-4
DESCRIPTION
Direct Plug'n'Play compatible with an Elite ECU CAN port or Elite ECU Harness CAN connector. Combine two or more Elite CAN Hubs as required to...
NEXUS R5 + UNIVERSAL WIRE-IN HARNESS KIT
DESCRIPTION
LENGTH: 2.5m (8')
SUITS: Racing application where advanced race features, data logging and power management control is required.
INCLUDES: NEXUS...
HPI8 - High Power Igniter - 15 Amp Eight ChannelModule Only
DESCRIPTION
The Haltech High Power Igniter is capable of driving up to 15 Amps per channel, allowing ignition coils to reach their...
HALTECH Elite 2500 + Nissan Patrol Y60 (TB42) Plug 'n' Play Adaptor Harness Kit
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for Nissan Patrol/Safari Y60 with automatic or manual...
HALTECH Coolant Temp Sensor - Small Thread
DESCRIPTION
Haltech coolant temperature sensor (CTS) gives instant information about coolant fluid temperature to the electronic control unit (ECU)....
Plug’n’Play adapter harness kit for FORD FOCUS RS MK1 for HALTECH Elite 1500 ECU
DESCRIPTION
If you want to install the Haltech Elite 1500 ECU on your Ford Focus RS MK1, this is the right product...
HALTECH Fuel Level Sender Signal Conditioner
DESCRIPTION
OUTPUTS: Filters a resistive signal for use with an Analogue Voltage Input (AVI).INCLUDES: HT-031016 - Matching Set of Deutsch DTM 4...