HALTECH NEXUS R3 + UNIVERSAL WIRE-IN HARNESS KIT
HALTECH NEXUS R3 + UNIVERSAL WIRE-IN HARNESS KIT DESCRIPTION LENGTH: 2.5m (8') SUITS: Engines with up to 8 cylinders or up to 4 rotors. Racing applications where advanced race features, data...
Here you can add custom original content(text, images, videos and more) for each product page.
16 other products in the same category:
HALTECH NEXUS R3 + UNIVERSAL WIRE-IN HARNESS KIT DESCRIPTION LENGTH: 2.5m (8') SUITS: Engines with up to 8 cylinders or up to 4 rotors. Racing applications where advanced race features, data...
HALTECH Elite 2500 + Terminated Harness Kit for Nissan RB Twin Cam With Series 2 (late) ignition type sub harness DESCRIPTION SUITS: Nissan RB Twin Cam RB20/25/26 with Series 2 Coils (Ignitor built...
HPI8 - High Power Igniter - 15 Amp Eight ChannelFlying Lead KitLENGTH: 2.0m (78") DESCRIPTION The Haltech High Power Igniter is capable of driving up to 15 Amps per channel, allowing ignition...
Haltech CAN Cable8 pin Black Tyco to 8 pin Black TycoLENGTH: 3000mm (120") DESCRIPTION LENGTH: 3000mm (120") Warning All GMC Racing items that involve increases in power greater than those...
Plug and Pins Only - Delphi 2 Pin GM styleAir Temp Connector (Grey) DESCRIPTION SUITS: HT-010200 - Air Temp Sensor - Small Thread HT-010202 - Air Temp Sensor - Large Thread HT-010204 - Air Temp...
HALTECH Plug and Pins Only - Factory Toyota 2JZ ign coil DESCRIPTION INCLUDES: Pack of 2 Pins. Warning All GMC Racing items that involve increases in power greater than those required by the...
HALTECH 1/4" Open Tip Thermocouple DESCRIPTION 1/4" Thermocouple 1.64m (64.5") long - Pre-terminated with Mini K Type connector to suit TCA 2 or 4 thermocouple amplifier. LENGTH: 1.64m...
HALTECH Elite 1500 + Subaru WRX MY99-00 Plug'n'Play Adaptor Harness Kit DESCRIPTION If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play...
NEXUS R5 Basic Universal Wire-In Harness 5 Metre Length DESCRIPTION LENGTH: 5M SUITS: NEXUS R5 INCLUDES: 5 x Main ECU connectors, 4 x CAN Connectors Fully populated with TXL wire NOTES: Extended...
HALTECH TH400 (Reid Case) Transmission Selector Position Kit DESCRIPTION SUITS: TH400 (Reid Case) transmissions Note: Bracket is designed to suit TH400 Reid case transmissions, but may fit other...
1/4" NUT AND BRASS FERRULE ONLY DESCRIPTION NOTES: Compression ferrules are single use and must be replaced when replacing probes. Warning All GMC Racing items that involve increases in power...
HALTECH Universal V8 Terminated Engine Harness for Nexus R5 VCU DESCRIPTION NOTES: Harness requires injection, ignition and alternator sub harnesses - Sold separately. HARNESS OVERVIEW Injector...
HALTECH Software Resource USB KEY DESCRIPTION INCLUDES: 1 USB Key and Lanyard. Warning All GMC Racing items that involve increases in power greater than those required by the highway code of the...
Plug and Pin Set for NEXUS R5 DESCRIPTION SUITS: NEXUS R5 INCLUDES: 1 x AMP 34 Position Connector Key1 1 x AMP 26 Position Connector Key1 1 x AMP 34 Position Connector Key2 1 x AMP 26 Position...
HALTECH ELITE 1500 + PREMIUM UNIVERSAL WIRE-IN HARNESS KIT, L: 2.5m (8') DESCRIPTION LENGTH: 2.5m (8') OUTPUTS: Up to 4 injector and 4 ignition. SUITS: Universal 1-12 cylinder or 2 rotor...
1/4" STAINLESS COMPRESSION FITTING KIT - THREAD: 1/8 NPT DESCRIPTION THREAD: 1/8 NPTINCLUDES: Nut and FerruleNOTES: Compression ferrules are single use and must be replaced when replacing...