HALTECH Elite 2500 + Mitsubishi EVO 9 & EVO 8 MR Plug'n'Play Adaptor Harness Kit
DESCRIPTION
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side that plug straight into the factory harness.
Simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
Quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
Guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
ECU overview
Haltech's Elite 2500 ECU takes the art of engine calibration to a whole new level. Featuring a robust environmentally sealed waterproof case, drive by wire throttle control, intake and exhaust cam control, short term and long term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators the tools they need to get the job done right. Alongside the Elite 2500 ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user friendliness never seen before in an engine control package. Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide.
Supports 1 to 12 cylinder engines
2 to 4 rotor engines
Normally aspirated or forced induction
Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP), or Mass Air Flow (MAF)
Staged, sequential, semi sequential, batch or multipoint injection patterns
Distributor ignition systems, multi-coil systems, expand CDI range, or Haltech Multiplex CDI systems
Connect to a wide range of display dashes and expansion devices via CAN
2 x Dedicated Engine Position Inputs with extensive trigger type support
Up to 45 channels of Input & Output (I/O) expansion (via CAN)
USB Laptop communication (Windows)
ESP Calibration Software - Intuitive and easy to use
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-151331
1 Item
Here you can add custom original content(text, images, videos and more) for each product page.
Plug and Pins Only - 12 Pin Tyco
DESCRIPTION
SUITS: DRA Digital Reluctor Adaptor.INCLUDES: Pack of 12 Pins
Warning
All GMC Racing items that involve increases in power greater than those required...
HALTECH 1/4" Open Tip Thermocouple (L. 2.44m)
DESCRIPTION
1/4" Thermocouple 2.44m (96") long - Pre-terminated with Mini K Type connector to suit TCA 2 or 4 thermocouple amplifier.
LENGTH: 2.44m...
HALTECH V8 Junior Timer (EV1) Injector Primary Breakout
DESCRIPTION
SUITS: Plug and Play with Haltech Nexus R5 Universal V8 Terminated harness - HT-186200
Warning
All GMC Racing items that involve...
HALTECH Wi-Fi Antenna Glass Mount 2.4 GhzDESCRIPTIONSUITS: NEXUS Series devicesTHREAD: RP-SMAINCLUDES: 1 x Glass Mount Wi-Fi Antenna. 1.5m lead. NOTES: For increasing signal strength when standard...
HALTECH 1/4" Open Tip Thermocouple
DESCRIPTION
LENGTH: 1/4 " 1.41m (55.5")SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier.INCLUDES: Mini K...
HALTECH Weld on Shock Sensor Tab - Mild Steel
DESCRIPTION
LENGTH: 50mm.
SUITS: Haltech Linear Position Sensors.
INCLUDES: 1 x Weld On Tab.
NOTES: Suits 1/2" Bodied Linear Position Sensors - 5/32" /...
TCA2 - Dual Channel Thermocouple AmplifierFlying Lead HarnessLENGTH: 1.5m (3')
DESCRIPTION
LENGTH: 1.5m (3')NOTES: Only required if using the optional 0-5 V analogue outputs.
Warning
All GMC...
HALTECH ECU Pins only - Tyco
DESCRIPTION
SUITS: 8-32 Pin Tyco Connector RangeINCLUDES: Pack of 10 Pins.
Warning
All GMC Racing items that involve increases in power greater than those required...
HALTECH WB1 - Single Channel CAN O2 Wideband Controller Kit
DESCRIPTION
This product allows the user the ability to increase the functionality of their Haltech ECU by using the Haltech CAN...
Plug and Pins Only - Matching Set of Deutsch DTM-2Connectors (7.5 Amp)
DESCRIPTION
INCLUDES: Male Plug, Female Receptacle/Socket, Wedgelocks, Seals, Male & Female Pins.
Warning
All GMC Racing...