The Elite 550 is a simple yet powerful ECU ideal for basic 4 to 8 cylinder or 1-2 rotor engine applications. Alongside this robust, competitive priced ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user-friendliness never seen before in an engine control package.
SUITS: Universal 1-8 cylinder or 2 rotor applications.
INCLUDES: Elite 550 ECU, basic universal wire-in harness, waterproof USB cap, USB programming cable, and software CD.
NOTES: Haltech's entry level, single connector ECU Kit. Ideal for basic 4 cylinder or 2 rotor engine applications and basic EFI conversions. Does not include fuse and relay box.
ECU overview
- Waterproof case (IP67) (with USB cover fitted)
- 34 position AMP connector
- 4 x Fuel Injection Outputs (peak and hold (0-8A peak / 0-2A hold)
- 4 x Ignition Outputs
- 2 x Dedicated Engine Position inputs with extensive trigger type support
- 1 x Digital Pulsed Input
- 5 x Digital Pulsed Outputs
- 1 x Analogue Voltage Input
- 3 x Dedicated Inputs (Throttle Position, Coolant Temperature & Air Temperature)
- Internal 3Bar MAP sensor rated up to 200kPa of boost (2Bar/29psi)
- Up to 33 channels of Input & Output (I/O) expansion (via CAN)
- USB Laptop Communication (Windows)
- ESP Calibration Software - Intuitive and easy to use
ECU functions
- Low Impedance Injector control with Programmable Injector Peak and Hold Currents.
- Closed Loop O2 Control - for precise tuning (With optional external CAN O2 Wideband Controller Kit).
- Closed Loop Idle Speed Control - requires 1 or 2 user defined outputs (BAC type).
- Laptop data logging - Data log all available channels directly to your laptop's hard drive for both tuning and diagnostics.
- CAN Bus communication for Haltech Dashes and expansion devices or OBDII (view live engine data & set and clear diagnostics trouble codes).
- 2 Injection Stages for use with Rotary Engines.
- ECU comes fully enabled, no additional charges for advanced features.
Engine adaptability
- Supports 1 to 8 Cylinder engines.
- 1 to 2 Rotor engines.
- Normally aspirated or forced induction.
Input and output
- 4 x Fuel Injection Outputs (peak and hold (0-8A peak / 0-2A hold)
- 4 x Ignition Outputs
- 2 x Dedicated Engine Position inputs with extensive trigger type support
- 1 x Digital Pulsed Input
- 5 x Digital Pulsed Outputs
- 1 x Analogue Voltage Input
- 3 x Dedicated Inputs (Throttle Position, Coolant Temperature & Air Temperature)
- Internal 3Bar MAP sensor rated up to 200kPa of boost (2Bar/29psi)
Communication
- Connect to a wide range of display dashes and expansion devices via CAN.
- USB Laptop Communication (Windows).
Harness overview
Ideal for dedicated race cars, engine swaps and custom wiring jobs. The Universal Wire-in Harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color coded and clearly labelled. Connect your Haltech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go!
Color coded and labelled wires that match the detailed wiring diagram for a confusion free construction proces.
The wiring diagram is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-150402
1 Item
Here you can add custom original content(text, images, videos and more) for each product page.
iC-7 OBD-II TO CAN CABLE
DESCRIPTION
LENGTH: 3000mm / 120in
SUITS: Haltech iC-7 Dash.
INCLUDES: Cable and fuse.
Warning
All GMC Racing items that involve increases in power greater than those...
HALTECH 1/4" Open Tip Thermocouple DESCRIPTIONLENGTH: 1/4 " 0.84m (33")SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier.INCLUDES: Mini K Type...
HALTECH Nexus LS 4 Pin Delco Alternator Harness
DESCRIPTION
LENGTH: 200mm.
NOTES: Harness is fitted with a 470R resistor to excite the alternator in place of a charge indicator light. Terminate to...
BOSCH 145 PSI FLUID PRESSURE AND TEMPERATURE SENSOR
DESCRIPTION
THREAD: M10 x 1.0INCLUDES: Includes: Matching plug and pins, M10 x 1.0 to 1/8NPT adaptor.NOTES: Used to measure fluid pressure and...
HALTECH Tacho Output Adaptor
DESCRIPTION
OUTPUTS: 1 x Coil Negative emulated signalINCLUDES: Matching Set of DTM 4 Connector plug and pinsNOTES: Requires Spare DPO on ECU
Warning
All GMC Racing...
HALTECH Pins only - Female pins to suit Male Deutsch DTP Connectors
DESCRIPTION
SUITS: Suits 14 - 12 AWG Cable.
INCLUDES: 10 x Female Pins suit DTP Series Connectors.
Warning
All GMC Racing items...
HIGH OUTPUT IGN-1A INDUCTIVE COIL WITH BUILT-IN IGNITION MODULE
DESCRIPTION
INCLUDES: Matching plug and pins
Warning
All GMC Racing items that involve increases in power greater than those...