Featuring a robust environmentally sealed waterproof case, intake cam control, short term, and long term map learning, dual channel knock control, and much more, the Elite 2000 ECU provides engine calibrators the tools they need to get the job done right.
- 2 x Dedicated Engine Position Inputs with extensive trigger type support
- Up to 45 channels of Input & Output (I/O) expansion (via CAN)
- USB laptop communication (Windows)
- ESP Calibration Software - Intuitive and easy to use
ECU functions
- Low Impedance Injector control with Programmable Injector Peak and Hold Currents & Programmable peak time.
- Flex Fuel Function (Direct sensor input) - Tune your engine's boost, fuel, and ignition by ethanol content.
- Flexible tuning setup for Petrol (Gasoline), Methanol, and Ethanol allows you to simply select your fuel type.
- Closed Loop O2 Control - Dual bank control for precise tuning (With optional external CAN O2 Wideband Controller Kit).
- Dual Channel Knock Control - Synchronized to engine position with high speed digital filtering for accurate detection.
- Variable cam control - Independently control up to 2 intake camshafts - Requires a minimum of 1 user defined input & output per variable cam.
- Closed Loop Idle Speed Control with learning for consistent idle stability. Requires 1 to 2 user defined outputs (BAC type) or 4 user defined output (Stepper motor type).
- Long term learning (Auto tune) on fuel, cam, boost & idle control maps (up to 4D).
- On-board data logging - Up to 20 channels of logging at sample rates up to 50ms with 1MB of internal memory.
- Laptop data logging - Data log all available channels directly to your laptop's hard drive for both tuning and diagnostics.
- Dual CAN Bus communication for Haltech Dashes and expansion devices & OBDII (view live engine data & set and clear diagnostics trouble codes).
- Injection Stages: up to 2 with individual injector flow rates per injector.
- Anti-Lag/Rotational idle for closed course racing, rally, circuit, or drift. Build and maintain boost during closed throttle conditions.
- Rolling Anti-Lag. Lock to your current (or pre-set) RPM or road speed for roll racing or pit lane limiting.
- Launch Control. Control your engine's power delivery, RPM & boost for consistent performance at the start line.
- 2 x Dedicated Engine Position Inputs with extensive trigger type support
Harness overview
Ideal for dedicated race cars, engine swaps, and custom wiring jobs. The Universal Wire-in Harness has a set of ECU connectors at one hand and unterminated wires at the other. All the wires at the unterminated end are color coded and clearly labelled. Connect your Haltech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go!
Color coded and labelled wires that match the detailed wiring diagram for a confusion free construction process.
The wiring diagram is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-151202
Here you can add custom original content(text, images, videos and more) for each product page.
Haltech Elite CAN CableDTM-4 to 8 pin Black TycoLENGTH: 150mm (6")
DESCRIPTION
LENGTH: 150mm (6")
Warning
All GMC Racing items that involve increases in power greater than those required by the...
NEXUS R5 Basic Universal Wire-In Harness
DESCRIPTION
LENGTH: 2.5M
SUITS: NEXUS R5
INCLUDES: 5 x Main ECU connectors 4 x CAN Connectors Fully populated with TXL wire
NOTES: The following cables...
HALTECH Elite 2000 ECU + Plug and Pin Set
DESCRIPTION
OUTPUTS: Up to 8 injector and 8 ignition.
SUITS: Universal 1-12 cylinder or 2-4 rotor applications.
INCLUDES: Elite 2000 ECU Plug and Pin set...
HALTECH 1/4" Open Tip Thermocouple
DESCRIPTION
LENGTH: 1/4 " (1.75m)SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier.INCLUDES: Mini K Type...
HALTECH V8 GT150 (USCAR) Injector Primary Breakout
DESCRIPTION
SUITS: Plug and Play with Haltech Nexus R5 Universal V8 Terminated harness - HT-186200
Warning
All GMC Racing items that involve...
HALTECH 1/4" Open Tip Thermocouple
DESCRIPTION
LENGTH: 1/4 " 1.87m (73.5")SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier.INCLUDES: Mini K...
HALTECH Software Resource USB KEY
DESCRIPTION
INCLUDES: 1 USB Key and Lanyard.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the...
Haltech CAN Cable8 pin White Tyco to 8 pin White TycoLENGTH: 300mm (12")
DESCRIPTION
LENGTH: 300mm (12")
Warning
All GMC Racing items that involve increases in power greater than those required...
HALTECH Elite 1500 + Mitsubishi Galant VR4 and Eclipse 1GPlug 'n' Play Adaptor Harness Kit
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for Mitsubishi Galant VR4 (Australian...
iC-7 TUBE MOUNT FOR TUBE OD 1.25in (31.75mm)
DESCRIPTION
SIZE: 60mmx44mm
SUITS: iC-7 Mounting Brackets (HT-060070 and HT-060071).
INCLUDES: 1 x Annodized Dash Tube Mount 2 x Zinc M8 x 10 Bracket...
HALTECH HPI6 - High Power Igniter - 15 Amp Six Channel Module Only
DESCRIPTION
The Haltech High Power Igniter is capable of driving up to 15 Amps per channel, allowing ignition coils to reach...