close
WASTEGATE TIAL MV-S-A RACING
  • WASTEGATE TIAL MV-S-A RACING

WASTEGATE TIAL MV-S-A RACING

€474.58
Tax included
WASTEGATE COLOR
Quantity
Product available for orders

This MV-S-A 38mm unit is designed specifically for motorsport applications that can't utilize the water cooling ports on he standard MV-S wastegate. This MV-S-A has a 38mm valve but also has heat isolating and dissipation fins that separate the casting from the actuator top.

WASTEGATE TIAL MV-S-A RACING

Description

  • High temp NiCrFe based alloy is used for valve and 347SS valve housing will offer longer product life compared to competing designs.
  • High-temperature silicone Nomex reinforced actuator diaphragm.
  • 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resist "relaxing" at temperature to 900F (483C).
  • Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing.
  • All Stainless Steel hardware.
  • Mating weld flanges are 304L.
  • Color anodized aluminum actuator (silver, red, blue, purple, black).
  • 3 lower ports and two top ports for easy install, no need to rotate the actuator top at all, plugs included for unused ports.
  • V-Band inlet and outlet make install easy, flanges and clamps are in the box!
  • Integrated -4 AN water cooling ports that cycle a small amount of coolant through the actuator top to keep the temperatures down in extreme conditions such as road racing. These are leak tested after installation from the factory and can be removed if not utilized.
  • Five heat sinks raise the actuator top away from the casting to dissipate heat when water cooling cannot be used.
  • Designed for Motorsport/Road Racing.
  • Born into the world of Motorsport this wastegate can handle the harshest of conditions and give the confidence of 100% performance. It is the choice wastegate of many WRC and Grand-am teams.

Warning

All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use.
GMC Racing disclaims all liability for any use of the product contrary to national standards.

WATER COOLED ACTUATOR TOP 

  • Two -4AN water ports.
  • Coolant passes through actuator bottom and has very little  affect on cooling system as a whole.                                                                                

TIAL V-BAND CLAMPS

CNC machined Stainless Steel clamps and CNC machined flanges ensure a secure and pressure tight fit.

TIAL RACING VALVE STEM

TiAL's MV-S-A is equipped with the racing valve stem. The Wear Coating is resistant at the corrosive effects of Lead oxide which is present when running leaded racing fuel. 

INSIDE THE BOX

Included with every Tial MV-S-A:
  • MV-S-A Assembly
  • 2 TiAL -4AN removable water fittings
  • MV-S Valve Seat
  • Inlet V-Band clamp and flange
  • Outlet V-Band clamp and flange
  • 2 TiAL Air Fittings
  • Plugs for unused air ports
  • Extra actuator springs

GMC0002WA

Here you can add custom original content(text, images, videos and more) for each product page.

11 other products in the same category: