Plug'n'Play replacement of the factory ECU for Mitsubishi EVO 4-8 (5 Speed)(All Regions) EVO 8 MR (USDM Only) Eclipse 2G Turbo (USDM) Manual transmissions only.
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side that plug straight into the factory harness.
Simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
Quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
Guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
ECU overview
Haltech's Elite 1500 ECU takes the art of engine calibration to a whole new level. Featuring a robust environmentally sealed case, drive by wire throttle control, intake and exhaust cam control, short term and long term map learning, knock control, and much more, the Elite 1500 ECU provides engine calibrators the tools they need to get the job done right. Alongside the Elite 1500 ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user friendliness never seen before in an engine control package. Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide.
Supports 1 to 12 cylinder engines
2 rotor engines
Normally aspirated or forced induction
Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP), or Mass Air Flow (MAF)
Staged, sequential, semi sequential, batch or multipoint injection patterns
Distributor ignition systems, multi-coil systems, expand CDI range, or Haltech Multiplex CDI systems
Connect to a wide range of display dashes and expansion devices via CAN
2 x Dedicated Engine Position Inputs with extensive trigger type support
Up to 45 channels of Input & Output (I/O) expansion (via CAN)
USB Laptop communication (Windows)
ESP Calibration Software - Intuitive and easy to use
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-150945
Here you can add custom original content(text, images, videos and more) for each product page.
HALTECH Elite 1000/1500 Nissan Silvia S13 and 180SX (SR20DET) Plug 'n' Play Adaptor Harness
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for Nissan Silvia S13 and 180SX...
HALTECH Elite 550 Basic Universal Wire-in Harness
DESCRIPTION
LENGTH: 2.5m (8’)
NOTES: Does not include fuse and relay box.
Harness overview
Ideal for dedicated race cars, engine swaps, and custom...
HALTECH Elite 1000/1500 Mitsubishi EVO 1-3 Plug 'n' Play Adaptor Harness
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for Mitsubishi EVO 1-3 GSR/RVR. Manual transmission only....
HALTECH Elite 2000/2500 Terminated Harness for Nissan RB Twin Cam With CAS Harness and Series 2 (late) ignition type sub harness
DESCRIPTION
SUITS: Nissan RB Twin Cam RB20/25/26 with Series 2 Coils...
Haltech Elite CAN CableDTM-4 to 8 pin Black TycoLENGTH: 3000mm (120")
DESCRIPTION
LENGTH: 3000mm (120")
Warning
All GMC Racing items that involve increases in power greater than those required by...
HALTECH Bosch 68mm Electronic Throttle Body - Includes connector and pins
DESCRIPTION
DIAMETER: 68mm
SUITS: Nexus and Elite VCU's and ECU's that support Drive by Wire Throttle Control (DBW)....
HPI4 - High Power Igniter - 15 Amp Quad Channelwith Plug & Pins
DESCRIPTION
The Haltech High Power Igniter is capable of driving up to 15 Amps per channel, allowing ignition coils to reach...
HALTECH 1/4" Open Tip Thermocouple
DESCRIPTION
1/4" Thermocouple 1.98m (78") long - Pre-terminated with Mini K Type connector to suit TCA 2 or 4 thermocouple amplifier.
LENGTH: 1.98m (78")SUITS:...
1/4" STAINLESS COMPRESSION FITTING KIT - THREAD: 1/8 NPT
DESCRIPTION
THREAD: 1/8 NPTINCLUDES: Nut and FerruleNOTES: Compression ferrules are single use and must be replaced when replacing...
HALTECH Elite PRO Plug-in ECUFor Ford Falcon I6 "Barra"
DESCRIPTION
SUITS: Ford Falcon BA (02-05), BF (05-08), FG (08-14) I6 4.0L DOHC VCT Barra engine with manual trans. Ford Falcon BF (05-08),...