Best sellers
V-BAND KIT 60mm DESCRIPTION V-Band clamp flange kit for stainless steel exhaust connection. SIZES: - diameter: 60.00mm Warning All GMC Racing items that involve increases in power greater than...
EXHAUST GAS TEMPERATURE GAUGE WITH RED PROBE DESCRIPTION Exhaust gas temperature gauge with RED led and memory complete with: - Gauge with 4 digits display that can measure more than 1000° with a...
STAINLESS STEEL SLEEVE KIT FOR LANCIA DELTA 16V/EVO DESCRIPTION Our stainless steel sleeve kit for Lancia Delta 16V/Evo can replace the original without the need for any structural modification....
V-BAND KIT 63.5mm DESCRIPTION V-Band clamp flange kit for stainless steel exhaust connection. SIZES: - diameter: 63.50mm Warning All GMC Racing items that involve increases in power greater than...
HEAT WRAP TAPE 25mm L10m DESCRIPTION This product is perfect for the insulation of manifold, exhaust pipe, and exhaust system. The thermal insulation wrap tape preserves the temperature of the...
V-BAND KIT 76mm DESCRIPTION V-Band clamp flange kit for stainless steel exhaust connection. SIZES: - diameter: 76.00mm Warning All GMC Racing items that involve increases in power greater than...
WASTEGATE TIAL MV-S Description High temp NiCrFe based alloy is used for valve and 347SS valve housing will odder longer product life compared to competing designs. High-temperature silicone...
V-BAND KIT 70mm DESCRIPTION V-Band clamp flange kit for stainless steel exhaust connection. SIZES: - diameter: 70.00mm Warning All GMC Racing items that involve increases in power greater than...
Active filters
CAN Adaptor LoomDTM-4 to 6-pin Circular Connector DESCRIPTION SUITS: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force GDI)INCLUDES: 1 x CAN Adaptor Loom...
CAN Adaptor LoomDTM-4 to Flying Leads DESCRIPTION SUITS: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series ConnectorINCLUDES: 1 x HT-130046 CAN Adaptor Loom...
CAN Adaptor LoomDTM-4 to JST 5-pin DESCRIPTION SUITS: Haltech IC-7 Dash, WBC 1, WBC 2 and Link Plug-in ECUsINCLUDES: 1 x CAN Adaptor Loom (DTM-4 to JST 5-pin) - Suits Link PlugIn ECUsNOTES: Use...
CAN Adaptor LoomDTM-4 to Minifit Jr DESCRIPTION SUITS: Haltech iC-7 and Microtech ECUsINCLUDES: 1 x HT-130049 Can Adaptor LoomNOTES: Use with Microtech CAN Hub for direct plug and play Warning All...
LSU4.9 WIDEBAND HARDWARE PACK DESCRIPTION SUITS: NEXUS SeriesINCLUDES: 1 x Bosch LSU 4.9 Sensor, 1 x HT-010726 - Adaptor Harness, 1 x Weldable BungNOTES: Plug and Play with NEXUS Series...
LSU4.9 Wideband Adaptor HarnessLSU4.9 to DTM6 DESCRIPTION SUITS: NEXUS Series devicesINCLUDES: 1 x HT-010726 LSU4.9 to DTM-6 HarnessNOTES: Plug'n'Play with NEXUS series harnesses Warning All GMC...
NTK Wideband Adaptor HarnessFor NEXUS Series DevicesDESCRIPTIONLENGTH: 1.2M (4ft)SUITS: NEXUS Series DevicesINCLUDES: 1 x HT-010727 NTK to DTM-6 HarnessWarningAll GMC Racing items that involve...
NTK Wideband Hardware Pack DESCRIPTION SUITS: NEXUS Series devicesINCLUDES: 1 x NTK LZA08-H5 Sensor, 1 x HT-010727 - NTK to DTM-6 Harness, 1 x Weldable BungNOTES: Plug'n'Play with NEXUS Series...
O2 Sensor weld-on bung - 303 Stainless Steel DESCRIPTION THREAD: M18 x1.5INCLUDES: 1 x Weld on Bung - 303 Stainless Steel 1 x Copper washer and 1 x Blanking plug. Warning All GMC Racing items that...
O2 Sensor weld-on bung - 303 Stainless Steel DESCRIPTION THREAD: M18 x1.5SUITS: M18 Thread Oxygen SensorsINCLUDES: 1 x 6061 Aluminium Weld On Bung Warning All GMC Racing items that involve...
Onboard Wideband Sensor Packfor Elite PRO Plug-in ECUs DESCRIPTION SUITS: Elite PRO Plug-in ECUs for Australian-made Ford "Barra" Falcons only.INCLUDES: O2 Sensor, 1.2m extension cable and weld-on...
HALTECH WB1 - Single Channel CAN O2 Wideband Controller Kit DESCRIPTION This product allows the user the ability to increase the functionality of their Haltech ECU by using the Haltech CAN...
