HALTECH Elite 1000/1500 Mitsubishi EVO 1-3 Plug 'n' Play Adaptor Harness
€481.90
Tax included
This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle. Fully programmable systems allow you to extract all the performance from your engine.
HALTECH Elite 1000/1500 Mitsubishi EVO 1-3 Plug 'n' Play Adaptor Harness
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for Mitsubishi EVO 1-3 GSR/RVR. Manual transmission only.
INCLUDES: Injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
Harness overview
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
A simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-140830
Here you can add custom original content(text, images, videos and more) for each product page.
HALTECH Elite 2000 + Nissan Patrol Y60 (TB42)Plug 'n' Play Adaptor Harness Kit
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for Nissan Patrol/Safari Y60 with automatic or manual...
HALTECH Elite 2500 GM GEN III LS1 & LS6(DBW Retrofit Ready) Terminated Harness
DESCRIPTION
INJECTOR CONNECTOR: Bosch EV1 (as per factory)SUITS: Retrofit of a GEN IV LS2/3 DBW throttlebody....
HALTECH Elite 1500 + VW/Audi 1.8T AWP ONLY (2001-2006)Plug 'n' Play Adaptor Harness Kit
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for VW/Audi 1.8T AWP ONLY (2001-2006)...
HALTECH Elite 750 Basic Universal Wire-in Harness
DESCRIPTION
LENGTH: 2.5m (8’)
NOTES: Does not include fuse and relay box.
Harness overview
Ideal for dedicated race cars, engine swaps, and custom...
HALTECH 1/4" Open Tip Thermocouple
DESCRIPTION
LENGTH: 1/4 " 1.52m (60")SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier.INCLUDES: Mini K Type...
Haltech Elite CAN cableDTM-4 to 8 pin Black TycoLENGTH: 900mm (36")
DESCRIPTION
LENGTH: 900mm (36")
Warning
All GMC Racing items that involve increases in power greater than those required by the...
HALTECH Bosch 68mm Electronic Throttle Body - Includes connector and pins
DESCRIPTION
DIAMETER: 68mm
SUITS: Nexus and Elite VCU's and ECU's that support Drive by Wire Throttle Control (DBW)....
HPI4 - High Power Igniter - 15 Amp Quad Channelwith Plug & Pins
DESCRIPTION
The Haltech High Power Igniter is capable of driving up to 15 Amps per channel, allowing ignition coils to reach...
CAN KEYPAD LABEL SET
OVERVIEW
SUITS: Haltech CAN KeypadsINCLUDES: 5 Label Sheet (140 individual labels)NOTES: A selection of pre designed, semi transparent labels to suit the backlit Haltech CAN...
HALTECH 5 Bar "TI" MAP Sensor THREAD: 1/8 NPT
DESCRIPTION
THREAD: 1/8 NPTINCLUDES: Matching Delphi plug and 3 pins, -4 AN & 5mm hosetail adaptors.NOTES: "TI" MAP sensors must not be mounted...
HALTECH Knock Sensor Suits 2014 Pro Tuner "Knock Ears" Kit
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user,...
HALTECH NEXUS R3 + UNIVERSAL WIRE-IN HARNESS KIT
DESCRIPTION
LENGTH: 2.5m (8')
SUITS: Engines with up to 8 cylinders or up to 4 rotors. Racing applications where advanced race features, data...