SUITS: Mazda Miata (MX-5) NA 1.6L and 1.8L with 2-plug, 2-row ECU. Manual transmission only. INCLUDES: Elite 1500 ECU with DBW and Race Functions, Plug'n'Play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin TYCO plug and pins, USB programming cable and USB software key. NOTES: Does not support USDM OBDII 96-97, Special Edition SE and Anniversary models.
ECU overview
Haltech's Elite 1500 ECU takes the art of engine calibration to a whole new level. Featuring a robust environmentally sealed case, drive by wire throttle control, intake and exhaust cam control, short term and long term map learning, knock control, and much more, the Elite 1500 ECU provides engine calibrators the tools they need to get the job done right. Alongside the Elite 1500 ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user friendliness never seen before in an engine control package. Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide.
Supports 1 to 12 cylinder engines
2 rotor engines
Normally aspirated or forced induction
Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP), or Mass Air Flow (MAF)
Staged, sequential, semi sequential, batch or multipoint injection patterns
Distributor ignition systems, multi-coil systems, expand CDI range, or Haltech Multiplex CDI systems
Connect to a wide range of display dashes and expansion devices via CAN
2 x Dedicated Engine Position Inputs with extensive trigger type support
Up to 45 channels of Input & Output (I/O) expansion (via CAN)
USB Laptop communication (Windows)
ESP Calibration Software - Intuitive and easy to use
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-150922
Here you can add custom original content(text, images, videos and more) for each product page.
HALTECH Waterproof (Type B) USB Extension Cable for Elite Pro Plug-in ECU / IC-7
DESCRIPTION
LENGTH: 400mm (16")
SUITS: Elite PRO Direct Plug-in ECUs, IC-7 Display Dash.
INCLUDES: Circular mini...
Dual Switch Panel Only
DESCRIPTION
INCLUDES: Dual panel and yellow adjustment knob.NOTES: 12 Position Rotary Trim Modules are NOT included, Please order 2 x HT-010504 if required.
Warning
All...
Haltech CAN Cable8 pin White Tyco to 8 pin White TycoLENGTH: 900mm (36")
DESCRIPTION
LENGTH: 600mm (24")
Warning
All GMC Racing items that involve increases in power greater than those required...
Haltech Elite CAN CableDTM-4 to DTM-4LENGTH: 1200mm (48")
DESCRIPTION
LENGTH: 1200mm (48")INCLUDES: 1 x DTM-4 to DTM-4 CAN Cable
Warning
All GMC Racing items that involve increases in power greater...
HALTECH Air Temp Sensor - Large ThreadTHREAD: 3/8 NPT 18TPI
DESCRIPTION
THREAD: 3/8 NPT 18TPIINCLUDES: Matching Delphi plug and pins.NOTES: 127 deg C (260 F) Max reading.
Warning
All GMC...
LSU4.9 Wideband Adaptor HarnessLSU4.9 to DTM6
DESCRIPTION
SUITS: NEXUS Series devicesINCLUDES: 1 x HT-010726 LSU4.9 to DTM-6 HarnessNOTES: Plug'n'Play with NEXUS series harnesses
Warning
All GMC...
HALTECH Software Resource USB KEY
DESCRIPTION
INCLUDES: 1 USB Key and Lanyard.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the...
HALTECH Pins only - Male pins to suit Female Deutsch DTMConnectors (Size 20, 7.5 Amp)
DESCRIPTION
INCLUDES: Pack of 10 Pins.
Warning
All GMC Racing items that involve increases in power greater...
iC-7 OBD-II TO CAN CABLE
DESCRIPTION
LENGTH: 3000mm / 120in
SUITS: Haltech iC-7 Dash.
INCLUDES: Cable and fuse.
Warning
All GMC Racing items that involve increases in power greater than those...
HALTECH WB2 - Dual Channel CAN O2 Wideband Controller Kit
DESCRIPTION
New Haltech Elite Dual Channel wide band CAN controller, designed to connect to all Sport and Elite ECUs via Haltech CAN bus....
Quad Channel OEM Igniter (DUMB)
DESCRIPTION
INCLUDES: Mounting bracket, thermal paste and matching plugs and pins.
Warning
All GMC Racing items that involve increases in power greater than those...
HALTECH Bosch 68mm Electronic Throttle Body - Includes connector and pins
DESCRIPTION
DIAMETER: 68mm
SUITS: Nexus and Elite VCU's and ECU's that support Drive by Wire Throttle Control (DBW)....
HALTECH Plug and Pins Only - Matching Set of Deutsch DT-4 Connectors (DT06-4S + DT04-4P) - (13 Amp)
DESCRIPTION
INCLUDES: 1 x DT04-4P Connector 1 x DT06-4S Connector 2 x Wedge Locks to suit 8 x...
HALTECH Elite PRO Plug-in ECUFor Ford Falcon I6 "Barra"
DESCRIPTION
SUITS: Ford Falcon BA (02-05), BF (05-08), FG (08-14) I6 4.0L DOHC VCT Barra engine with manual trans. Ford Falcon BF (05-08),...
HALTECH 3 Bar GM MAP Sensor
DESCRIPTION
A Haltech MAP sensor (Manifold Absolute Pressure) provides instantaneous pressure information to the electronic control unit (ECU) from the intake...
HALTECH Split Collar Shock Sensor Mount - 1 5/8" / 41.275mm
DESCRIPTION
LENGTH: N/A
SUITS: All Haltech Linear Position Sensors.
INCLUDES: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts....