A Haltech MAP sensor (Manifold Absolute Pressure) provides instantaneous pressure information to the electronic control unit (ECU) from the intake manifold- the amount of boost or vacuum in the intake manifold.
A Haltech MAP sensor (Manifold Absolute Pressure) provides instantaneous pressure information to the electronic control unit (ECU) from the intake manifold- the amount of boost or vacuum in the intake manifold. This is necessary to calculate air density and determine the engine's air mass flow rate or in other words engine load. Engine load is used as a reference for all base fuel and ignition maps.
1 Bar Map Sensor
A 1 bar MAP sensor is capable of reading intake pressures below or equal to atmospheric pressure. For this reason, a 1 bar Map sensor is suitable only for naturally aspirated engines (ie not turbo or supercharged).
2 Bar Map Sensor
A 2 bar MAP sensor is capable of reading intake pressures up to 1 bar of positive pressure above the atmospheric (otherwise known as boost). This is equivalent to around 14.7psi of boost or 100kpa of positive pressure. This sensor is suitable for turbocharged or supercharged vehicles running 15psi of boost or less.
3 Bar Map Sensor
A 3 bar MAP sensor is capable of reading intake pressures up to 2 bar of positive pressure above atmospheric (otherwise known as boost). This is equivalent to around 29.4psi of boost or 200kpa of positive pressure. This sensor is suitable for turbocharged or supercharged vehicles running between 15psi and 30psi of boost.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-010104
2 Items
Here you can add custom original content(text, images, videos and more) for each product page.
HALTECH Elite 2500 + Nissan Patrol Y60 (TB42) Plug 'n' Play Adaptor Harness Kit
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for Nissan Patrol/Safari Y60 with automatic or manual...
Haltech Elite CAN CableDTM-4 to DTM-4LENGTH: 75mm (3")
DESCRIPTION
LENGTH: 75mm (3")
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code...
HALTECH IO 12 Expander - 12 Channel (CAN ID - Box A)
DESCRIPTION
The Haltech IO Expander 12 allows the user the ability to increase the functionality of their Haltech ECU by using the Haltech CAN...
Rare Earth MagnetsSIZE: 5mm Diameter x 2mm Height
DESCRIPTION
SIZE: 5mm Diameter x 2mm Height
Warning
All GMC Racing items that involve increases in power greater than those required by the...
HALTECH V8 GM/Chrysler Hemi Small/Big Block 8 x IndividualHigh Output IGN-1A Inductive Coil Harness
DESCRIPTION
SUITS: A direct Plug 'n' Play solution to add 8 individual high output IGN-1A...
HALTECH Elite 1000/1500 Nissan 200SX/Silvia S15 & S14A S2 Plug 'n' Play Adaptor Harness
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for Nissan 200SX/Silvia S15 (Australian...
HALTECH Elite 2500 & 2500 T Premium Universal Wire-in Harness
DESCRIPTION
Ideal for dedicated race cars, engine swaps, and custom wiring jobs. The Universal Wire-in Harness has a set of ECU...
WIDEBAND O2 SENSOR ONLY - Bosch LSU 4.2
DESCRIPTION
INCLUDES: Pre-terminated with female Deutsch DT-6 connector.
Warning
All GMC Racing items that involve increases in power greater than those...
HALTECH Plug and Pins Only - Suits Bosch 150psi Fluid Pressure and Temperature Sensor
DESCRIPTION
SUITS: HT-010920 - Bosch 150psi Fluid Pressure and Temperature SensorINCLUDES: 1 X 5 Pin Plug, 5 x...
HALTECH Linear Position Sensor - 1" - 150mm Travel
DESCRIPTION
LENGTH: Between Mounting Holes (Closed) 277mm.
SUITS: All ECU's with spare AVI.
INCLUDES: 1 x Sensor, 1 x Opposing Connector Set....
HALTECH HPI8 - High Power Igniter - 15 Amp Eight Channel Flying Lead Loom Only LENGTH: 2.0m (78")
DESCRIPTION
The Haltech High Power Igniter is capable of driving up to 15 Amps per channel,...