HALTECH Elite 1000/1500 Plug'n'Play Adaptor Harness for Honda S2000
€481.90
Tax included
This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle. Fully programmable systems allow you to extract all the performance from your engine.
HALTECH Elite 1000/1500 Plug'n'Play Adaptor Harness for Honda S2000
DESCRIPTION
SUITS: Honda S2000 AP1 (00-04), AP2 (05) non-DBW.
INCLUDES: Plug'n'Play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
NOTES: Non Drive-By-Wire (DBW) application only.
Adaptor overview
This adaptor plugs directly into your Haltech Elite ECU and has a set of factory connectors on the other side which plug straight into the factory harness. A quick and easy plug'n'play upgrade solution.
A simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
When purchased as a kit with a Haltech ECU, this product is accompanied by the full ECU manual and Software located on the CD or USB key.
Features
Idle Control (BAC)
Thermofan
Tachometer
A/C Request And Control
Engine Control Relay
Fuel Pump
Electrical Power Steering Load Detect
Knock Sensor 1
Coolant Temperature Sensor
Air Temperature Sensor
O2 Sensor Front & Rear
Check Engine Light
Throttle Position Sensor
Vehicle Speed Sensor
VTEC Oil Pressure Switch
VTEC Solenoid
Air Pump Relay (E1500 Only)
Factory Map Sensor
Alternator Control
Brake Pedal Switch
Electrical Load Detect
S2000 Coolant Gauge
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-140843
Here you can add custom original content(text, images, videos and more) for each product page.
HALTECH USB Connection Cable USB A to USB C
DESCRIPTION
SUITS: Nexus Series Products with USB-C connection.
INCLUDES: USB Connection Cable - USB A to USB C.
NOTES: USB2.0 Specification, 2A Max...
iC-7 OBD-II TO CAN CABLE
DESCRIPTION
LENGTH: 3000mm / 120in
SUITS: Haltech iC-7 Dash.
INCLUDES: Cable and fuse.
Warning
All GMC Racing items that involve increases in power greater than those...
HALTECH Plug and Pins Only - Factory Toyota 2JZ Crank/Cam
DESCRIPTION
INCLUDES: Pack of 2 Pins.
Warning
All GMC Racing items that involve increases in power greater than those required by the...
HALTECH Firewall Rubber Wiring GrommetDIAMETER: 51mm (2") OD 21mm (13/16") ID
DESCRIPTION
DIAMETER: 51mm (2") OD 21mm (13/16") ID
Warning
All GMC Racing items that involve increases in power...
HALTECH Linear Position Sensor - 1/2" - 200mm Travel
DESCRIPTION
LENGTH: Between Mounting Holes (Closed) 317mm.
SUITS: All ECU's with spare AVI.
INCLUDES: 1 x Sensor, 1 x Opposing Connector Set....
HALTECH Crimping Tool Suits DT Series Solid Contacts
DESCRIPTION
SUITS: DT Series Solid Contacts and Cables sizes 0.5mm2 to 1.5mm2.
INCLUDES: 1 x DT Crimping tool.
NOTES: Use with Solid Barrell...
1 BAR GM MAP SENSOR
DESCRIPTION
INCLUDES: Matching plug and 3 pins.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of...
HALTECH Nexus R3 Tube Mount Kit - 1.25"
DESCRIPTION
SUITS: NEXUS R3 VCU
INCLUDES: 1 x Mounting Plate, 2 x 1.25" Tube Clamps.
NOTES: Brackets are made from CNC machined 6061 Aluminum and then...
This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle. Fully programmable systems allow you to extract all the performance from your engine.
