The Elite 550 is a simple yet powerful ECU ideal for basic 4 to 8 cylinder or 1-2 rotor engine applications. Alongside this robust, competitively priced ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user-friendliness never seen before in an engine control package.
SUITS: Universal 1-8 cylinder or 2 rotor applications.
INCLUDES: 1 x Elite 550 ECU + Plug and Pins to suit
ECU overview
- Waterproof case (IP67) (with USB cover fitted)
- 34 position AMP connector
- 4 x Fuel Injection Outputs (peak and hold (0-8A peak / 0-2A hold)
- 4 x Ignition Outputs
- 2 x Dedicated Engine Position inputs with extensive trigger type support
- 1 x Digital Pulsed Input
- 5 x Digital Pulsed Outputs
- 1 x Analogue Voltage Input
- 3 x Dedicated Inputs (Throttle Position, Coolant Temperature & Air Temperature)
- Internal 3Bar MAP sensor rated up to 200kPa of boost (2Bar/29psi)
- Up to 33 channels of Input & Output (I/O) expansion (via CAN)
- USB Laptop Communication (Windows)
- ESP Calibration Software - Intuitive and easy to use
ECU functions
- Low Impedance Injector control with Programmable Injector Peak and Hold Currents.
- Closed Loop O2 Control - for precise tuning (With optional external CAN O2 Wideband Controller Kit).
- Closed Loop Idle Speed Control - requires 1 or 2 user defined outputs (BAC type).
- Laptop data logging - Data log all available channels directly to your laptop's hard drive for both tuning and diagnostics.
- CAN Bus communication for Haltech Dashes and expansion devices or OBDII (view live engine data & set and clear diagnostic trouble codes).
- 2 Injection Stages for use with Rotary Engines.
- ECU comes fully enabled, no additional charges for advanced features.
Engine adaptability
- Supports 1 to 8 Cylinder engines.
- 1 to 2 Rotor engines.
- Normally aspirated or forced induction.
Input and output
- 4 x Fuel Injection Outputs (peak and hold (0-8A peak / 0-2A hold)
- 4 x Ignition Outputs
- 2 x Dedicated Engine Position inputs with extensive trigger type support
- 1 x Digital Pulsed Input
- 5 x Digital Pulsed Outputs
- 1 x Analogue Voltage Input
- 3 x Dedicated Inputs (Throttle Position, Coolant Temperature & Air Temperature)
- Internal 3Bar MAP sensor rated up to 200kPa of boost (2Bar/29psi)
Communications
- Connect to a wide range of display dashes and expansion devices via CAN.
- USB Laptop Communication (Windows).
Harness overview
Ideal for dedicated race cars, engine swaps, and custom wiring jobs. The Universal Wire-in Harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color coded and clearly labelled. Connect your Haltech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go!
Color coded and labelled wires that match the detailed wiring diagram for a confusion free construction process.
The wiring diagram is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-150401
Here you can add custom original content(text, images, videos and more) for each product page.
Haltech CAN cavoDa 8 pin nero Tyco a 8 pin nero TycoLUNGHEZZA: 150mm (6")
DESCRIPTION
LENGTH: 150mm (6")
Warning
All GMC Racing items that involve increases in power greater than those required...
HALTECH Plug and Pins Only - 8 Pin White Tyco
DESCRIPTION
SUITS: Platinum Series ECU and CAN Hub Connector.INCLUDES: Pack of 8 Pins.
Warning
All GMC Racing items that involve increases in power...
HALTECH MULTI-FUNCTION CAN GAUGE SIZE: 52mm (2")
DESCRIPTION
SIZE: 52mm (2")
SUITS: Haltech Version 2 CAN bus protocol.
INCLUDES: 52mm (2") CAN Gauge, gaugeART DTM-style CAN cable - 2.5m (8ft),...
HALTECH Elite 2500 & REM 16 Inj V8 Small/Big BlockGM, Ford & Chrysler Terminated HarnessINJECTOR CONNECTOR: Bosch EV1
DESCRIPTION
INJECTOR CONNECTOR: Bosch EV1OUTPUTS: Up to 16 injectors, 8...
Plug and Pins Only - AMP 26 Pin 2 RowSuperseal Connector
DESCRIPTION
SUITS: HT-020032 - HPI4 - High Power Igniter HT-020036 - HPI6 - High Power Igniter HT-020040 - HPI8 - High Power Igniter...
WIDEBAND O2 SENSOR ONLY - Bosch LSU 4.2
DESCRIPTION
INCLUDES: Pre-terminated with female Deutsch DT-6 connector.
Warning
All GMC Racing items that involve increases in power greater than those...
HALTECH Flex Fuel Fittings 3/8 "GM Spring Lock" -6AN Male
DESCRIPTION
SUITS: GM Flex Fuel Sensors.INCLUDES: Two fittings.
Warning
All GMC Racing items that involve increases in power greater...
Haltech Elite CAN CableDTM-4 to DTM-4LENGTH: 600mm (24")
DESCRIPTION
LENGTH: 600mm (24")
Warning
All GMC Racing items that involve increases in power greater than those required by the highway...
Elite 2500 GM GEN IV LSx (LS2/LS3 etc) DBW ReadyTerminated HarnessINJECTOR CONNECTOR: Bosch EV6 (as per factory)
DESCRIPTION
INJECTOR CONNECTOR: Bosch EV6 (as per factory)SUITS: Common US style...
HALTECH Linear Position Sensor - 1" - 250mm Travel
DESCRIPTION
LENGTH: Between Mounting Holes (Closed) 377mm.
SUITS: All ECU's with spare AVI.
INCLUDES: 1 x Sensor, 1 x Opposing Connector Set....
HALTECH TH400 Standard Case Transmission Selector Position Kit
DESCRIPTION
SUITS: TH400 Standard Case transmissions. Note: Bracket is designed to suit TH400 Standard case transmissions, but may fit...
HPI6 - High Power Igniter - 15 Amp Six ChannelFlying Lead Loom OnlyLENGTH: 2.0m (78")
DESCRIPTION
The Haltech High Power Igniter is capable of driving up to 15 Amps per channel, allowing...