NEXUS R5 is the new Haltech flagship product combining the functionality of a power distribution module, a data logger, a dual channel wideband controller and a state-of-the art engine management system in one powerful device we call a VCU (Vehicle Control Unit).
SUITS: Racing application where advanced race features, data logging and power management control is required.
INCLUDES: NEXUS R5 VCU, SurLok connectors (Red and Black), Wi-Fi antenna, mounting bolts, USB-C Cable, USB-C dust cap, USB drive with NSP Software.
VCU OVERVIEW
4 x 25A (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump)
12 x 8A (continuous) high side outputs (low speed PWM, 200 Hz) outputs (power to sensors, NOS solenoids, etc)
18 x peak/hold injector drivers (can be used as low side drive outputs)
12 x low current ignition outputs (can be used as low side drive outputs)
8 x low side drive outputs, PWM capable (DPOs)
4 x push-pull / h-bridge outputs (8A, PWM capable), eg for electronic throttle
23 x 0-5V analog inputs with redunancy for electronic throttle and switchable 5V pullup
Trigger and home inputs with differential inputs, adjustable thresholds and glitch filters
10 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5V analog inputs
2 x onboard wideband controllers, supporting NTK and LSU4.9
3 x CAN ports with switchable termination
VCU FEATURES
Long Term Learning
Stepper Motor Control
4D Closed Loop Boost Control
Closed Loop CO2 Control
Rotational Idle
Launch Control
Traction Control
Anti-Lag
Dual Knock Control
Trans Brake Control
Race Timer
Multi Stage Fuel Injection
Multi-level Engine Protection
6 Stage Nitrous Control
4-sensor variable cam control
Intake Air Bleed Control
Flat Shift Control
Shock Travel & Ride Height Control
Advanced Torque Management
AUTOMATIC TRANSMISSION CONTROL
Ford AODE/4R70W
GM 4L60E
GM 4L80E
Toyota A340E
Lenco
Liberty
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
NEXUS R5 Basic Universal Wire-In Harness
DESCRIPTION
LENGTH: 2.5M
SUITS: NEXUS R5
INCLUDES: 5 x Main ECU connectors 4 x CAN Connectors Fully populated with TXL wire
NOTES: The following cables...
Plug and Pin Set for NEXUS R5
DESCRIPTION
SUITS: NEXUS R5
INCLUDES: 1 x AMP 34 Position Connector Key1 1 x AMP 26 Position Connector Key1 1 x AMP 34 Position Connector Key2 1 x AMP 26 Position...
NEXUS CAN Keypad 8 button (2x4)
VCU OVERVIEW
SUITS: NEXUS devices only
INCLUDES: 1 x 8 button keypad (2x4), 1 x Adaptor Harness DT-4 to DTM-4, 1 x DTM to DTM Cable -1200mm, 1 x Label Set, 1 x...
Plug and pin set for NEXUS R3
DESCRIPTION
INCLUDES: 1 x AMP 34 Position Connector Key1 + pins, 1 x AMP 34 Position Connector Key2 + pins, 1 x DTP 4 Position Deutsch Connector wedge and pins....
NEXUS CAN Keypad 8 button (2x4)
VCU OVERVIEW
SUITS: NEXUS devices only
INCLUDES: 1 x 8 button keypad (2x4), 1 x Adaptor Harness DT-4 to DTM-4, 1 x DTM to DTM Cable -1200mm, 1 x Label Set, 1 x...
Plug and Pins Only - Male Deutsch DTM-3 Connector(7.5 Amp)
DESCRIPTION
SUITS: Elite ECU CAN port (on ECU and/or Harness)INCLUDES: Male Plug, Wedgelock Seal & Female Pins.
Warning
All GMC...
HALTECH Elite 1500 + Mitsubishi EVO 4-8 (5 SPEED) Plug'n'Play Adaptor Harness Kit
DESCRIPTION
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech...
HPI6 - High Power Igniter - 15 Amp Six ChannelFlying Lead Loom OnlyLENGTH: 2.0m (78")
DESCRIPTION
The Haltech High Power Igniter is capable of driving up to 15 Amps per channel, allowing...
1/4" Stainless Steel Weld-on Base Only
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only...
HALTECH Elite 2000 + Toyota Chaser JZX100 (1JZ-GTE)Plug 'n' Play Adaptor Harness Kit
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for Toyota Mark II/Cresta/Chaser JZX100 1JZ-GTE...
HALTECH iC-7 OBDII to CAN Cable
DESCRIPTION
LENGTH: 3000mm / 120in
SUITS: Haltech iC-7 Dash
INCLUDES: Cables and Fuse
Warning
All GMC Racing items that involve increases in power greater than...
HALTECH Elite 2500 + Toyota Chaser JZX100 (1JZ-GTE) Plug 'n' Play Adaptor Harness Kit
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for Toyota Mark II/Cresta/Chaser JZX100...
"Red" Single Channel Hall Effect SensorTHREAD: M12x1.0
DESCRIPTION
THREAD: M12x1.0SUITS: Wheel Speed, Crank/Cam etc.INCLUDES: Matching set of Deutsch DTM 3 connectors (HT-031014)
Warning
All GMC...
Triple Switch Panel Only
DESCRIPTION
INCLUDES: Triple panel and yellow and red adjustment knobs.NOTES: 12 Position Rotary Trim Modules are NOT included, Please order 3 x HT-010504 if required....
HALTECH Air Temperature Sensor
DESCRIPTION
Haltech intake air temperature sensor (ATS) gives instant information about air temperature to the electronic control unit (ECU). The ATS is a critical...
HALTECH Analogue Output Adaptor
DESCRIPTION
OUTPUTS: Converts a PWM Output to 0-5v Analogue Signal.SUITS: e.g for use with Evo 10 AWD controller.INCLUDES: HT-031016 - Matching Set of Deutsch DTM 4...