Haltech Elite ECU series brings the art of engine management to a whole new level. The Elite series offers preparators and tuning and high-performance enthusiasts worldwide innovative technology.
SUITS: Universal 1-12 cylinder or 2 rotor applications.
INCLUDES: Elite 1500 ECU with DBW and Race Functions. Premium Universal Wire-In Harness. Firewall grommet, moulded 6 power circuit Haltech fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power curcuits, USB programming cable and USB Software Key.
- 2 x dedicated engine position inputs with extensive trigger type support
- Up to 45 channels of Input & Output (I/O) expansion (via CAN)
- USB laptop communication (Windows)
- ESP Calibration Software - intuitive and easy to use
ECU functions
- Drive by Wire Throttle Control (DBW).
- Low Impedance Injector control with Programmable Injector Peak and Hold Currents & Programmable peak time.
- Flex fuel support (Direct sensor input) - Tune your engine's boost, fuel, and ignition by ethanol content.
- Flexible tuning setup for Petrol (Gasoline), Methanol, and Ethanol.
- Closed Loop O2 Control - Dual bank control for precise tuning (With optional external CAN O2 Wideband Controller Kit).
- Knock Control - Synchronised to engine position with high speed digital filtering for accurate detection.
- Variable cam control - Independently control up to 4 camshafts.
- Closed Loop Idle Speed Control with learning for consistent idle stability.
- Long term learning (Auto tune) on fuel, ignition, cam, boost & idle control maps (up to 4D).
- On-board data logging - Up to 40 channels of logging at sample rates up to 5ms (200Hz) with 2MB of internal memory.
- Laptop data logging - Data log all available channels directly to your laptop's hard drive for both tuning and diagnostics.
- Dual CAN Bus communication for Haltech Dashes and expansion devices. Supports OEM CAN & OBDII. View live engine data & set/clear diagnostics trouble codes.
- 1-4 injection stages with individual injector flow rates per injector.
- Anti-Lag/Rotational idle for closed course racing, rally, circuit, or drift. Build and maintain boost during closed throttle conditions.
- Rolling Anti-Lag. Lock to your current (or pre-set) RPM or road speed for roll racing or pit lane limiting.
- Launch Control. Control your engine's power delivery, RPM & boost for consistent performance at the start line.
- Traction Control. Control your engine's power output via mappable front vs rear axle or individual wheel speed slip.
- 2 x dedicated engine position inputs with extensive trigger type support
Harness overview
Ideal for dedicated race cars, engine swaps, and custom wiring jobs. The Universal Wire-in Harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color coded and clearly labelled. Connect your Haltech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go!
Color coded and labelled wires that match the detailed wiring diagram for a confusion free construction process.
The wiring diagram is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-150905
Here you can add custom original content(text, images, videos and more) for each product page.
HALTECH V8 GM/Chrysler Hemi Small/Big Block 8 x IndividualHigh Output IGN-1A Inductive Coil and Harness Kit
DESCRIPTION
SUITS: A direct Plug 'n' Play solution to add 8 individual high output IGN-1A...
HALTECH Elite 2500 & 2500 T Basic Universal Wire-in Harness
DESCRIPTION
Ideal for dedicated race cars, engine swaps, and custom wiring jobs. The Universal Wire-in Harness has a set of ECU...
HALTECH Plug and pins only - AMP 26 pin Key 1 Suits Nexus and Elite Series ECU's
DESCRIPTION
SUITS: Nexus and Elite Series ECU's.
INCLUDES: 1 x AMP 26 Position Connector Key 1, 30 x Pins suit AMP...
HALTECH V8 GT150 (USCAR) Injector Secondary Breakout
DESCRIPTION
SUITS: Plug and Play with Haltech Nexus R5 Universal V8 Terminated harness - HT-186200
Warning
All GMC Racing items that involve...
Haltech Elite CAN CableDTM-4 to DTM-4LENGTH: 300mm (12")
DESCRIPTION
LENGTH: 300mm (12")INCLUDES: 1 x CAN Connection Cable
Warning
All GMC Racing items that involve increases in power greater than...
HALTECH Elite 1500 + Mitsubishi EVO 4-8 (5 SPEED) Plug'n'Play Adaptor Harness Kit
DESCRIPTION
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech...
HALTECH Linear Position Sensor - 1/2" - 50mm Travel
DESCRIPTION
LENGTH: Between Mounting Holes (Closed) 167mm.
SUITS: All ECU's with spare AVI.
INCLUDES: 1 x Sensor, 1 x Opposing Connector Set....
Dual Switch Panel Only
DESCRIPTION
INCLUDES: Dual panel and yellow adjustment knob.NOTES: 12 Position Rotary Trim Modules are NOT included, Please order 2 x HT-010504 if required.
Warning
All...
HALTECH 3 Bar Motorsport MAP Sensor
DESCRIPTION
A Haltech MAP sensor (Manifold Absolute Pressure) provides instantaneous pressure information to the electronic control unit (ECU) from the intake...
HALTECH Elite 2500 Terminated Engine Harness For Ford Falcon BA/BF Barra 4.0L I6 INJECTOR CONNECTOR: Factory Bosch EV1
DESCRIPTION
INJECTOR CONNECTOR: Bosch EV1
SUITS: Ford Barra Engine found in...
Haltech Elite CAN CableDTM-4 to 8 pin Black TycoLENGTH: 3600mm (144")
DESCRIPTION
LENGTH: 3600mm (144")
Warning
All GMC Racing items that involve increases in power greater than those required by...
HALTECH High Output CDI Coil
DESCRIPTION
INCLUDES: Matching Delphi plug and pins.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of...
HALTECH Split Collar Shock Sensor Mount - 1 1/2" / 38.1mm
DESCRIPTION
LENGTH: N/A
SUITS: All Haltech Linear Position Sensors.
INCLUDES: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts....
HALTECH Nissan Attesa 4WD TPS Adaptor
DESCRIPTION
OUTPUTS: Produces the correct scaled TPS output signal required for the MFD and Attesa 4WD functions when using a standalone ECU.INCLUDES:...