Plug'n'Play replacement of the factory ECU for Mitsubishi EVO 4-8 (5 Speed)(All Regions) EVO 8 MR (USDM Only) Eclipse 2G Turbo (USDM) Manual transmissions only.
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side that plug straight into the factory harness.
Simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
Quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
Guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
ECU features
Harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning your vehicle.
Programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-140823
1 Item
Here you can add custom original content(text, images, videos and more) for each product page.
IO 12 Expander - 12 Channel withFlying Lead Harness Kit (CAN ID - Box A)LENGTH: 2.5m (8')
DESCRIPTION
The Haltech IO Expander 12 allows the user the ability to increase the functionality of their...
HALTECH Elite PRO Plug-in ECUFor Ford Falcon I6 "Barra"
DESCRIPTION
SUITS: Ford Falcon BA (02-05), BF (05-08), FG (08-14) I6 4.0L DOHC VCT Barra engine with manual trans. Ford Falcon BF (05-08),...
HALTECH Oil Temperature Sensor High Range
DESCRIPTION
Haltech oil temperature sensor (OTS) gives instant information about oil temperature to the electronic control unit (ECU). Haltech is...
HALTECH 1/4" Open Tip Thermocouple (L. 2.44m)
DESCRIPTION
1/4" Thermocouple 2.44m (96") long - Pre-terminated with Mini K Type connector to suit TCA 2 or 4 thermocouple amplifier.
LENGTH: 2.44m...
Triple Switch Panel Only
DESCRIPTION
INCLUDES: Triple panel and yellow and red adjustment knobs.NOTES: 12 Position Rotary Trim Modules are NOT included, Please order 3 x HT-010504 if required....
HALTECH HPI4 - High Power Igniter - 15 Amp Quad Channel Module Only
DESCRIPTION
The Haltech High Power Igniter is capable of driving up to 15 Amps per channel, allowing ignition coils to reach...
Plugs and Pins Only - Suit Idle Air Control Motor2 Screw Style
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the...
HALTECH Elite CAN HUB 4 Port DTM-4
DESCRIPTION
Direct Plug'n'Play compatible with an Elite ECU CAN port or Elite ECU Harness CAN connector. Combine two or more Elite CAN Hubs as required to...
HALTECH V8 GT150 (USCAR) Injector Secondary Breakout
DESCRIPTION
SUITS: Plug and Play with Haltech Nexus R5 Universal V8 Terminated harness - HT-186200
Warning
All GMC Racing items that involve...
HALTECH Elite 2500 + Terminated Harness Kit For Ford Falcon FG Barra 4.0L I6 - Injector Connector: Factory Bosch EV1
DESCRIPTION
SUITS: Ford Barra Engine found in FG Variants Barra 270T FG, 310T,...
Haltech Elite CAN CableDTM-4 to DTM-4LENGTH: 1200mm (48")
DESCRIPTION
LENGTH: 1200mm (48")INCLUDES: 1 x DTM-4 to DTM-4 CAN Cable
Warning
All GMC Racing items that involve increases in power greater...