HALTECH Elite 1500 Mazda 13B S6-8 CAS with Flying Lead Ignition Terminated Harness INJECTOR CONNECTOR: Bosch EV1
€1,023.79
Tax included
This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle. Fully programmable systems allow you to extract all the performance from your engine.
HALTECH Elite 1000 Mazda 13B S6-8 CAS with Flying Lead Ignition Terminated Harness
DESCRIPTION
INJECTOR CONNECTOR: Bosch EV1
SUITS: S6-8 CAS (Crank Angle Sensor) WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included).
INCLUDES: Engine harness with fuse block, firewall grommet and flying lead ignition harness.
ECU overview
The fastest and most cost effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this plug and Play product allows you to be up and running in just a few hours.
A simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-140879
Here you can add custom original content(text, images, videos and more) for each product page.
BOSCH 145 PSI FLUID PRESSURE AND TEMPERATURE SENSOR
DESCRIPTION
THREAD: M10 x 1.0INCLUDES: Includes: Matching plug and pins, M10 x 1.0 to 1/8NPT adaptor.NOTES: Used to measure fluid pressure and...
Triple Switch Panel Kit
DESCRIPTION
INCLUDES: Triple panel, yellow and red adjustment knobs and 3 x 12 position rotary trim modules.
Warning
All GMC Racing items that involve increases in power...
HALTECH Plug and Pins Only - Matching Set of Deutsch DT-2 Connectors (DT06-8S + DT04-8P) - ( 13 Amp)
DESCRIPTION
INCLUDES: 1 x DT04-8P Connector 1 x DT06-8S Connector 2 x Wedge Locks to suit 16 x...
HALTECH Elite 2500 + Subaru Liberty/Legacy Gen 4 3.0R & GT Plug 'n' Play Adaptor Harness Kit
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for Subaru Liberty/Legacy Gen 4 3.0R...
HALTECH TH400 Standard Case Transmission Selector Position Kit
DESCRIPTION
SUITS: TH400 Standard Case transmissions. Note: Bracket is designed to suit TH400 Standard case transmissions, but may fit...
HALTECH ELITE RACE EXPANSION MODULE (REM)
DESCRIPTION
OUTPUTS: Up to 8 injectors and auxiliary I/O.
SUITS: Universal 1-12 cylinder or 2-4 rotor applications. Up to 16 sequential injector...
HALTECH Flex Fuel Composition Sensor
DESCRIPTION
To be used with Haltech Platinum Sport, Platinum PRO, Elite 750, Elite 1500, and Elite 2500 ECUs and IO 12 Expander.
If you want to adapt to...
HALTECH Elite 1000/1500 Subaru WRX MY99-00 Plug'n'Play Adaptor Harness
DESCRIPTION
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor...
Haltech Elite CAN CableDTM-4 to DTM-4LENGTH: 300mm (12")
DESCRIPTION
LENGTH: 300mm (12")INCLUDES: 1 x CAN Connection Cable
Warning
All GMC Racing items that involve increases in power greater than...
HALTECH Linear Position Sensor - 1" - 150mm Travel
DESCRIPTION
LENGTH: Between Mounting Holes (Closed) 277mm.
SUITS: All ECU's with spare AVI.
INCLUDES: 1 x Sensor, 1 x Opposing Connector Set....