HALTECH Elite 1500 Mazda 13B S6-8 CAS with IGN-1A Ignition Terminated Harness INJECTOR CONNECTOR: Bosch EV1
€1,108.16
Tax included
This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle. Fully programmable systems allow you to extract all the performance from your engine.
HALTECH Elite 1000 Mazda 13B S6-8 CAS with IGN-1A Ignition Terminated Harness INJECTOR CONNECTOR: Bosch EV1
DESCRIPTION
INJECTOR CONNECTOR: Bosch EV1
SUITS: S6-8 (Crank Angle Sensor) WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included).
INCLUDES: Engine harness with fuse block, firewall grommet and pre-wired High Output IGN-1A Inductive Coil (with built-in Ignitor) Ignition Harness.
NOTES: IGN-1A coils are NOT included. Please order 4 x HT-020114 if required.
ECU overview
The fastest and most cost effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this plug and Play product allows you to be up and running in just a few hours.
An efficient Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
High Output IGN-1A Coil Terminated Ignition Harness
The Haltech Mazda 13B Ignition Harness connects to the Haltech IGN-1A ignition coils.
Recommended as an add-on to the Elite 1000/1500 Terminated Engine Harness for Mazda 13B.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-140882
Here you can add custom original content(text, images, videos and more) for each product page.
CAN Adaptor Loom DTM-4 to Flying Leads
DESCRIPTION
SUITS: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series Connector
INCLUDES: 1 x HT-130046 CAN Adaptor Loom...
HALTECH Nexus R3 Tube Mount Kit - 1.25"
DESCRIPTION
SUITS: NEXUS R3 VCU
INCLUDES: 1 x Mounting Plate, 2 x 1.25" Tube Clamps.
NOTES: Brackets are made from CNC machined 6061 Aluminum and then...
Haltech Elite CAN CableDTM-4 to DTM-4LENGTH: 3600mm (144")
DESCRIPTION
LENGTH: 3600mm (144")
Warning
All GMC Racing items that involve increases in power greater than those required by the highway...
HALTECH LS1 Coil with built-in Ignitor
DESCRIPTION
INCLUDES: Matching plug and pins.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code...
HALTECH EXTENSION CABLE FOR MULTI-FUNCTION CAN GAUGE LENGTH: 150cm (5')
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country...
HALTECH Plug and Pins Only - Matching Set of Deutsch DTP-4 Connectors (25 Amp)
DESCRIPTION
INCLUDES: DTP 4P Kit 1 x DTP04-4P including wedge 1 x DTP06-4S including wedge 4 x 12/14AWG Female Pins 4...
HALTECH V8 Ford Small/Big Block 8 x IndividualHigh Output IGN-1A Inductive Coil Harness
DESCRIPTION
SUITS: A direct Plug 'n' Play solution to add 8 individual high output IGN-1A inductive coils...
Haltech Elite CAN CableDTM-4 to 8 pin Black TycoLENGTH: 1200mm (48")
DESCRIPTION
LENGTH: 1200mm (48")
Warning
All GMC Racing items that involve increases in power greater than those required by...
NEXUS CAN Keypad 8 button (2x4)
VCU OVERVIEW
SUITS: NEXUS devices only
INCLUDES: 1 x 8 button keypad (2x4), 1 x Adaptor Harness DT-4 to DTM-4, 1 x DTM to DTM Cable -1200mm, 1 x Label Set, 1 x...
HALTECH 1/4" Stainless Steel Weld-on Kit
DESCRIPTION
6mm stainless steel weld-on nipple for exhaust gas temperature probe with nut and ferrule.
Warning
All GMC Racing items that involve...
HALTECH 1 AWG Battery Cable (Black)
DESCRIPTION
LENGTH: Sold per meter.
INCLUDES: 1 AWG battery cable black. Made to order in 1m increments. 1m minimum required length.
NOTES: Made to order....
HALTECH Elite 2500 + Nissan Patrol Y60 (TB42) Plug 'n' Play Adaptor Harness Kit
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for Nissan Patrol/Safari Y60 with automatic or manual...
This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle. Fully programmable systems allow you to extract all the performance from your engine.
