Featuring a robust environmentally sealed waterproof case, intake cam control, short term, and long term map learning, dual channel knock control, and much more, the Elite 2000 ECU provides engine calibrators the tools they need to get the job done right.
- 2 x Dedicated Engine Position Inputs with extensive trigger type support
- Up to 45 channels of Input & Output (I/O) expansion (via CAN)
- USB laptop communication (Windows)
- ESP Calibration Software - Intuitive and easy to use
ECU functions
- Low Impedance Injector control with Programmable Injector Peak and Hold Currents & Programmable peak time.
- Flex Fuel Function (Direct sensor input) - Tune your engine's boost, fuel, and ignition by ethanol content.
- Flexible tuning setup for Petrol (Gasoline), Methanol, and Ethanol allows you to simply select your fuel type.
- Closed Loop O2 Control - Dual bank control for precise tuning (With optional external CAN O2 Wideband Controller Kit).
- Dual Channel Knock Control - Synchronized to engine position with high speed digital filtering for accurate detection.
- Variable cam control - Independently control up to 2 intake camshafts - Requires a minimum of 1 user defined input & output per variable cam.
- Closed Loop Idle Speed Control with learning for consistent idle stability. Requires 1 to 2 user defined outputs (BAC type) or 4 user defined output (Stepper motor type).
- Long term learning (Auto tune) on fuel, cam, boost & idle control maps (up to 4D).
- On-board data logging - Up to 20 channels of logging at sample rates up to 50ms with 1MB of internal memory.
- Laptop data logging - Data log all available channels directly to your laptop's hard drive for both tuning and diagnostics.
- Dual CAN Bus communication for Haltech Dashes and expansion devices & OBDII (view live engine data & set and clear diagnostics trouble codes).
- Injection Stages: up to 2 with individual injector flow rates per injector.
- Anti-Lag/Rotational idle for closed course racing, rally, circuit, or drift. Build and maintain boost during closed throttle conditions.
- Rolling Anti-Lag. Lock to your current (or pre-set) RPM or road speed for roll racing or pit lane limiting.
- Launch Control. Control your engine's power delivery, RPM & boost for consistent performance at the start line.
- 2 x Dedicated Engine Position Inputs with extensive trigger type support
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-151201
Here you can add custom original content(text, images, videos and more) for each product page.
HALTECH Plug and Pins Only - Flex Fuel Composition Sensor
DESCRIPTION
INCLUDES: Pack of 3 pins.
Warning
All GMC Racing items that involve increases in power greater than those required by the...
HALTECH HPI8 - High Power Igniter - 15 Amp Eight Channel Flying Lead Loom Only LENGTH: 2.0m (78")
DESCRIPTION
The Haltech High Power Igniter is capable of driving up to 15 Amps per channel,...
HPI4 - High Power Igniter - 15 Amp Quad ChannelFlying Lead KitLENGTH: 2.0m (78")
DESCRIPTION
The Haltech High Power Igniter is capable of driving up to 15 Amps per channel, allowing ignition...
HALTECH Elite 1500 + Mitsubishi EVO 4-8 (5 SPEED) Plug'n'Play Adaptor Harness Kit
DESCRIPTION
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech...
HALTECH 1/4" Open Tip Thermocouple
DESCRIPTION
LENGTH: 2.32m (91.5")SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier.INCLUDES: Mini K Type...
Haltech CAN Cable8 pin White Tyco to 8 pin White TycoLENGTH: 150mm (6")
DESCRIPTION
LENGTH: 150mm (6")
Warning
All GMC Racing items that involve increases in power greater than those required by...
2000 PSI BRAKE/NITROUS PRESSURE SENSOR
DESCRIPTION
THREAD: 1/8 NPTINCLUDES: Matching Delphi plug and 3 pins.
Warning
All GMC Racing items that involve increases in power greater than those...
1/4" NUT AND BRASS FERRULE ONLY
DESCRIPTION
NOTES: Compression ferrules are single use and must be replaced when replacing probes.
Warning
All GMC Racing items that involve increases in power...
HALTECH ELITE 1500 ECU
DESCRIPTION
OUTPUTS: Up to 4 injector and 4 ignition.
SUITS: Popular late-model performance and racing applications. Recommended for 4 cylinder, DWB or 2 rotor engines,...
HALTECH TH400 (Reid Case) Transmission Selector Position Kit
DESCRIPTION
SUITS: TH400 (Reid Case) transmissions Note: Bracket is designed to suit TH400 Reid case transmissions, but may fit other...
1/4" Mild Steel Weld-on Base Only
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for...