NEXUS R3 combines the functionality of a power distribution module, a data logger, a wideband controller and a state-of-the-art engine management system in one powerful device we call a VCU (Vehicle Control Unit).
SUITS: Engines with up to 8 cylinders or up to 4 rotors. Racing application where advanced race features, data logging and power management control is required. INCLUDES: NEXUS R3 VCU, SurLok connectors (Red and Black), Wi-Fi antenna, mounting bolts, USB-C Cable, USB-C dust cap, USB drive with NSP Software.
4 x 25A (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump)
8 x peak/hold injector drivers (can be used as low side drive outputs)
8 x low current ignition outputs (can be used as low side drive outputs)
6 x low side drive outputs, PWM capable (DPOs)
6 x push-pull / h-bridge outputs (8A, PWM capable), eg for electronic throttle
11 x 0-5V analog inputs with redunancy for electronic throttle and switchable 5V pullup
Trigger and home inputs with differential inputs, adjustable thresholds and glitch filters
6 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5V analog inputs
1 x onboard wideband controllers, supporting NTK and LSU4.9
1 x on-board 4 bar MAP sensor
2 x CAN ports with switchable termination
VCU FEATURES
Controlled via NSP (Nexus Software Programmer)
Long Term Learning
Stepper Motor Control
4D Closed Loop Boost Control
Closed Loop CO2 Control
Rotational Idle
Launch Control
Traction Control
Anti-Lag
Dual Knock Control
Trans Brake Control
Race Timer
Multi Stage Fuel Injection
Multi-level Engine Protection
6 Stage Nitrous Control
4-sensor variable cam control
Intake Air Bleed Control
Flat Shift Control
Shock Travel & Ride Height Control
Advanced Torque Management
On-board Wi-Fi
On-board data logging (128MB)
AUTOMATIC TRANSMISSION CONTROL
Ford AODE/4R70W
GM 4L60E
GM 4L80E
Toyota A340E
Lenco
Liberty
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
NEXUS R5 Basic Universal Wire-In Harness
DESCRIPTION
LENGTH: 2.5M
SUITS: NEXUS R5
INCLUDES: 5 x Main ECU connectors 4 x CAN Connectors Fully populated with TXL wire
NOTES: The following cables...
Plug and Pin Set for NEXUS R5
DESCRIPTION
SUITS: NEXUS R5
INCLUDES: 1 x AMP 34 Position Connector Key1 1 x AMP 26 Position Connector Key1 1 x AMP 34 Position Connector Key2 1 x AMP 26 Position...
NEXUS CAN Keypad 8 button (2x4)
VCU OVERVIEW
SUITS: NEXUS devices only
INCLUDES: 1 x 8 button keypad (2x4), 1 x Adaptor Harness DT-4 to DTM-4, 1 x DTM to DTM Cable -1200mm, 1 x Label Set, 1 x...
HALTECH Elite 1500 + VW/Audi 1.8T AWP ONLY (2001-2006)Plug 'n' Play Adaptor Harness Kit
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for VW/Audi 1.8T AWP ONLY (2001-2006)...
Triple Switch Panel Only
DESCRIPTION
INCLUDES: Triple panel and yellow and red adjustment knobs.NOTES: 12 Position Rotary Trim Modules are NOT included, Please order 3 x HT-010504 if required....
Bosch 4000psi Fluid Pressure and Temperature SensorTHREAD: M10 x 1.0
DESCRIPTION
THREAD: M10 x 1.0INCLUDES: Includes: Matching plug, pins and sealsNOTES: Used to measure fluid pressure and...
IO 12 Expander - 12 Channel withFlying Lead Harness Kit (CAN ID - Box A)LENGTH: 2.5m (8')
DESCRIPTION
The Haltech IO Expander 12 allows the user the ability to increase the functionality of their...
HALTECH Elite 1000/1500 Subaru WRX MY93-96 & Liberty RS Plug'n'Play Adaptor Harness
DESCRIPTION
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech...
Bosch - DBW Pedal Assembly
DESCRIPTION
SUITS: Nexus and Elite VCU's and ECU's that support Drive by Wire Throttle Control (DBW).
INCLUDES: DBW Pedal Assembly and matching connector and pin set...
HALTECH Elite 1000/1500 Mitsubishi EVO 1-3 Plug 'n' Play Adaptor Harness
DESCRIPTION
SUITS: Plug 'n' Play replacement of the factory ECU for Mitsubishi EVO 1-3 GSR/RVR. Manual transmission only....
TCA2 - Dual Channel Thermocouple AmplifierFlying Lead HarnessLENGTH: 1.5m (3')
DESCRIPTION
LENGTH: 1.5m (3')NOTES: Only required if using the optional 0-5 V analogue outputs.
Warning
All GMC...
Haltech CAN Cable8 pin Black Tyco to 8 pin Black TycoLENGTH: 3600mm (144")
DESCRIPTION
LENGTH: 3600mm (144")
Warning
All GMC Racing items that involve increases in power greater than those...
Plugs and Pins Only - Suit Idle Air Control Motor2 Screw Style
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the...
NEXUS R5 + UNIVERSAL WIRE-IN HARNESS KIT - 5M / 16'
DESCRIPTION
LENGTH: 5m (16')
SUITS: Racing application where advances race features, data logging and power management control is required....
HALTECH Pins only - Male pins to suit Female Deutsch DTP Connectors
DESCRIPTION
SUITS: Suits 14 - 12 AWG Cable.
INCLUDES: 10 x Male Pins suit DTP Series Connectors.
Warning
All GMC Racing items...
HALTECH Plug and Pins Only - Flex Fuel Composition Sensor
DESCRIPTION
INCLUDES: Pack of 3 pins.
Warning
All GMC Racing items that involve increases in power greater than those required by the...
Haltech CAN Cable8 pin White Tyco to 8 pin White TycoLENGTH: 3000mm (120")
DESCRIPTION
LENGTH: 3000mm (120")
Warning
All GMC Racing items that involve increases in power greater than those...
NEXUS R3 combines the functionality of a power distribution module, a data logger, a wideband controller and a state-of-the-art engine management system in one powerful device we call a VCU (Vehicle Control Unit).
