HALTECH Elite 2500 + Toyota 2JZ No Ignition Harness Terminated Harness Kit
€2,868.01
Tax included
Elite 2500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications. Featuring a robust environmentally sealed water-resistant IP67-rated case, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right.
HALTECH Elite 2500 + Toyota 2JZ No Ignition Harness Terminated Harness Kit - Injector Connector: Bosch EV1
DESCRIPTION
SUITS: VVT-i and non VVT-i engines. Manual trasmission only.
INCLUDES: Elite 2500 ECU with DBW and Race Functions. Engine harness with fuse block, firewall grommet, 1200mm ignition extension harness, USB programming cable and USB Software Key.
NOTE: If your engine is fitted with the factory electronic ETCS-i throttle body, it will require a "Throttle Convert Kit" or conversion to a cable operated mechanical throttle body.
HARNESS OVERVIEW
The fastest and most cost-effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this plug and Play product allows you to be up and running in just a few hours.
A simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
ECU OVERVIEW
Supports 1 to 12 Cylinder engines
2 to 4 Rotor engines
Normally aspirated or forced induction
Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF)
Staged, Sequential, semi sequential, batch or multipoint injection patterns
Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems
Connect to a wide range of display dashes and expansion devices via CAN.
2 x Dedicated Engine Position Inputs with extensive trigger type support
Up to 45 channels of Input & Output (I/O) expansion (via CAN)
USB Laptop communication (Windows)
Now using the new NSP Calibration Software
HARNESS FEATURES
This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
ECU FUNCTIONS
Drive by Wire Throttle Control (DBW) - Requires (2) user defined outputs (4) user defined inputs
Low Impedance Injector control with Programmable Injector Peak and Hold Currents & Programmable peak time
Flex Fuel Function (Direct sensor input) - Tune your engines boost, fuel and ignition by ethanol content
Flexible tuning setup for Petrol (Gasoline), LPG, Methanol and Ethanol allows you to simply select your fuel typE
Closed Loop 02 Control - Dual bank control for precise tuning (With optional external CAN O2 Wideband Controller Kit)
Dual Channel Knock Control - Synchronised to engine position with high speed digital filtering for accurate detection
Variable cam control - Independently control up to 4 camshafts - Requires a minimum of 1 user defined input & output per variable cam
Closed Loop Idle Speed Control with learning for consistent idle stability Requires 1 or 2 user defined outputs (BAC type) or 4 user defined outputs (Stepper motor type)
Long term learning (Auto tune) on fuel, ignition, cam, boost & idle control maps (up to 4D)
On-board data logging - Up to 40 channels of logging at sample rates up to 5ms (200Hz) with 2MB of internal memory
Laptop data logging -Data log all available channels directly to your laptop's hard drive for both tuning and diagnostics
Dual CAN Bus communication for Haltech Dashes and expansion devices, Supported OEM CAN & OBDII (view live engine data & set and clear diagnostic trouble codes)
Injection Stages: up to 4 with individual injector flow rates per injector
8 Injector drivers for 2 sequential stages on 4 cylinder & 3 rotor engines and up to 4 sequential stages on 2 rotor engines
Anti-Lag/Rotational idle - for closed course racing, rally, circuit or drift. Build and maintain boost during closed throttle conditions
Rolling Anti-Lag - lock to your current (or pre-set) RPM or road speed for roll racing or pit lane limiting
Launch Control - Control your engines power delivery, RPM & boost for consistent performance at the start line
Traction Control - Control your engines power output via mappable front vs rear axle or individual wheel speed slip.
ADVANCED TUNING
Tuning Table Resolution up to 32 x 32 x 8
Limitless tuning flexibility -Tune your engine by a combination of 4D tuning tables combined with 3D per cylinder compensations and multiple user definable corrections
Tune by a combination of manifold pressure, throttle position, cam position, ethanol content, gear, road speed, race time, EGT, shock travel, ride height or any channel for ultimate flexibility - Dual mapping is a thing of the past.
Per Cylinder Tuning Correction - 3D
Wideband O2 - Connect up to 9 Channels via CAN expansion devices
Thermocouples/EGT (Exhaust Gas Temperature) - Connect up to 12 Channels via external CAN expansion devices
Engine Protection - Set advanced multi-level limits for sensors and protect your engine against common causes of failure
RACE FUNCTIONS
Nitrous control with advanced programming of up to 6 stages of wet or dry nitrous kits with on/off delays & banked control options.
Fuel and ignition corrections for all stages.
Boost Control -Intelligent 4D Closed loop, with learning, flexible user definable axis and 14 fully user definable boost target and duty cycle corrections.
Modes - example boost by gear, road speed, race timer, shock travel, ride height etc.
Sequential turbo control
CO2 Boost control, wastegate pressure and position, intake air bleed control (charge pipe wastegate) functionality for the hard-core racer
Flat shift - Optimise your shifting precision via a combination of inputs such as a clutch switch or strain gauge.
Shock Travel/Ride Height inputs allow dynamic tuning and data logging to assist in chassis development and power delivery
Timer Functions - Use the combination of the race timer and 5 additional programmable timers for time based control of multiple engine parameters, power delivery and other user definable functions
Trans brake function allows smooth and consistent control of start line staging (Bump or Creep)
Optional Upgrade - Advanced Torque Management - A fully integrated driveshaft RPM target race function that provides the ultimate control and consistency for the serious drag racer, eliminating the need for costly external controllers
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use.
GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-151353
Here you can add custom original content(text, images, videos and more) for each product page.
HALTECH Fuel Level Sender Signal Conditioner
DESCRIPTION
OUTPUTS: Filters a resistive signal for use with an Analogue Voltage Input (AVI).INCLUDES: HT-031016 - Matching Set of Deutsch DTM 4...
Elite 2500 GM GEN IV LSx (LS2/LS3 etc) DBW ReadyTerminated HarnessINJECTOR CONNECTOR: Bosch EV6 (as per factory)
DESCRIPTION
INJECTOR CONNECTOR: Bosch EV6 (as per factory)SUITS: Common US style...
HALTECH Plug and Pins Only - Flex Fuel Composition Sensor
DESCRIPTION
INCLUDES: Pack of 3 pins.
Warning
All GMC Racing items that involve increases in power greater than those required by the...
TCA2 - Dual Channel Thermocouple AmplifierFlying Lead HarnessLENGTH: 1.5m (3')
DESCRIPTION
LENGTH: 1.5m (3')NOTES: Only required if using the optional 0-5 V analogue outputs.
Warning
All GMC...
Haltech Elite CAN CableDTM-4 to 8 pin Black TycoLENGTH: 600mm (24")
DESCRIPTION
LENGTH: 600mm (24")
Warning
All GMC Racing items that involve increases in power greater than those required by the...
HALTECH HALTECH Elite 2000/2500 Ignition Harness For Ford Barra 4.0 BA/BF
DESCRIPTION
SUITS: Ford Barra 4.0L BA/BF.
INCLUDES: Elite 2000/2500 Ignition Sub-Harness for Ford Barra.
NOTES: * Use with...
HALTECH TCA4 - Quad Channel Thermocouple Amplifier (CAN ID - Box A)
DESCRIPTION
As supplied this product is direct Plug'n'Play compatible with an Elite ECU CAN port, Elite ECU Harness CAN...
HALTECH PLATINUM PRO PLUG-IN ECU HONDA DC5/RSX KIT (2005-06)
DESCRIPTION
If you are after a simple plug-and-play option and your car still has its original engine and wiring in it, a Plug-in ECU...
Plug and pin set for NEXUS R3
DESCRIPTION
INCLUDES: 1 x AMP 34 Position Connector Key1 + pins, 1 x AMP 34 Position Connector Key2 + pins, 1 x DTP 4 Position Deutsch Connector wedge and pins....
HALTECH Plug and Pins Only - 8 Pin White Tyco
DESCRIPTION
SUITS: Platinum Series ECU and CAN Hub Connector.INCLUDES: Pack of 8 Pins.
Warning
All GMC Racing items that involve increases in power...
HALTECH Waterproof (Type B) USB Extension Cable for Elite Pro Plug-in ECU / IC-7
DESCRIPTION
LENGTH: 400mm (16")
SUITS: Elite PRO Direct Plug-in ECUs, IC-7 Display Dash.
INCLUDES: Circular mini...
HPI6 - High Power Igniter - 15 Amp Six Channelwith Plug & Pins
DESCRIPTION
INCLUDES: Matching AMP 26 Pin 2 Row Superseal Connector and pins.
Warning
All GMC Racing items that involve...