This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle. Fully programmable systems allow you to extract all the performance from your engine.
INCLUDES: Injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plugand pins, auxiliary I/O 16 Pin Tyco plug and pins.
NOTES: Manual transmission only.
Harness overview
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
A simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
When purchased as a kit with a Haltech ECU, this product is accompanied by the full ECU manual and Software located on the CD or USB key.
Features
SUPPORTED OEM FUNCTIONALITY
ATTESA AWD system
Throttle Position Sensor
Turbo Pressure Signal
Power Steering Switch
Tachometer
Engine Control Relay
Wastegate Solenoid
Check Engine Light
Idle Air Control
Coolant Temp
A/C Control
A/C Pressure
Cooling Fan
Vehicle Speed
Narrowband O2
Electrical Load Switch
Fuel Pump Voltage Control
Fuel Pump Relay Output
Knock Sensor 1
Knock Sensor 2
Mass Air Flow
VCT Solenoid
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-141258
Here you can add custom original content(text, images, videos and more) for each product page.
Haltech CAN Cable8 pin Black Tyco to 8 pin Black TycoLENGTH: 1800mm (72")
DESCRIPTION
LENGTH: 1800mm (72")
Warning
All GMC Racing items that involve increases in power greater than those required...
HALTECH 7 Bar "TI" MAP Sensor THREAD: 1/8 NPT
DESCRIPTION
THREAD: 1/8 NPTINCLUDES: Matching plug and pins, -4 AN & 5mm hosetail adaptors.NOTES: "TI" MAP sensors must not be mounted directly to...
Haltech CAN Adaptor CableDTM-4 Female Receptacle/Socket to 8 pin Black Tyco
DESCRIPTION
SUITS: Used to adapt a Platinum series ECU to Elite DTM-4 CAN system.
Warning
All GMC Racing items that...
HALTECH Elite 550 ECU + Plug and Pin Set
DESCRIPTION
LENGTH: 5.0m (16')
OUTPUTS: Up to 4 injector and 4 ignition.
SUITS: Universal 1-8 cylinder or 2 rotor applications.
INCLUDES: 1 x Elite...
Platinum ECU Rail-type mounts
DESCRIPTION
SUITS: All products housed in a silver extrusion.INCLUDES: Pack of 4 mounts and screws.
Warning
All GMC Racing items that involve increases in power...
Dual Switch Panel Kit
DESCRIPTION
INCLUDES: Dual panel, yellow adjustment knob and 2 x 12 position rotary trim modules.
Warning
All GMC Racing items that involve increases in power greater than...
HALTECH HALTECH Elite 2000/2500 Ignition Harness For Ford Barra 4.0 BA/BF
DESCRIPTION
SUITS: Ford Barra 4.0L BA/BF.
INCLUDES: Elite 2000/2500 Ignition Sub-Harness for Ford Barra.
NOTES: * Use with...
HALTECH Nexus LS 2 Pin Yazaki Alternator Harness
DESCRIPTION
LENGTH: 200mm.
NOTES: Harness is fitted with a 470R resistor to excite the alternator in place of a charge indicator light.
Warning
All...
Bosch - DBW Pedal Assembly
DESCRIPTION
SUITS: Nexus and Elite VCU's and ECU's that support Drive by Wire Throttle Control (DBW).
INCLUDES: DBW Pedal Assembly and matching connector and pin set...
HALTECH Linear Position Sensor - 1" - 250mm Travel
DESCRIPTION
LENGTH: Between Mounting Holes (Closed) 377mm.
SUITS: All ECU's with spare AVI.
INCLUDES: 1 x Sensor, 1 x Opposing Connector Set....
Plug and Pins Only - Delphi 2 Pin GM styleAir Temp Connector (Grey)
DESCRIPTION
SUITS: HT-010200 - Air Temp Sensor - Small Thread HT-010202 - Air Temp Sensor - Large Thread HT-010204 - Air Temp...
Haltech CAN Cable8 pin White Tyco to 8 pin White TycoLENGTH: 3000mm (120")
DESCRIPTION
LENGTH: 3000mm (120")
Warning
All GMC Racing items that involve increases in power greater than those...
HALTECH Elite 2500 + Mitsubishi EVO 9 & EVO 8 MR Plug'n'Play Adaptor Harness Kit
DESCRIPTION
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech...
This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle. Fully programmable systems allow you to extract all the performance from your engine.
