HALTECH Elite 750 Toyota LandCruiser 80 Series NB Plug'n'Play Adaptor Harness
€481.90
Tax included
This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle. Fully programmable systems allow you to extract all the performance from your engine.
HALTECH Elite 750 Toyota LandCruiser 80 Series NB Plug'n'Play Adaptor Harness
DESCRIPTION
SUITS: Plug'n'Play replacement of the factory ECU for MY95-97 Toyota LandCruiser 80 Series with 1FZ-FE and manual transmission only. Supports sub tank transfer system. (European delivered models please confirm your ECU pin out with Haltech before ordering) INCLUDES: Plug'n'Play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins. NOTES: Spare ignition outputs can be used (via custom wiring) to convert from distributor to direct fire ignition system. (6 individual coils). E750 ECU does NOT support the factory idle speed stepper motor control. Please use an E2000/2500 ECU if this function is required.
Adaptor overview
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
A simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-140647
Here you can add custom original content(text, images, videos and more) for each product page.
HALTECH ELITE 1500 ECU
DESCRIPTION
OUTPUTS: Up to 4 injector and 4 ignition.
SUITS: Popular late-model performance and racing applications. Recommended for 4 cylinder, DWB or 2 rotor engines,...
NEXUS R5 Basic Universal Wire-In Harness
DESCRIPTION
LENGTH: 2.5M
SUITS: NEXUS R5
INCLUDES: 5 x Main ECU connectors 4 x CAN Connectors Fully populated with TXL wire
NOTES: The following cables...
HALTECH Elite 2500 + Toyota LandCruiser 80 Series Plug 'n' Play Adaptor Harness Kit
DESCRIPTION
SUITS: MY95-97 Toyota LandCruiser 80 Series with 1FZ-FE and manual transmission only. Supports sub...
HALTECH Plug and Pins Only - Bosch 4000psi Fluid Pressure and Temperature Sensor
DESCRIPTION
SUITS: HT-010925 - Bosch 4000psi Fluid Pressure and Temperature SensorINCLUDES: 1 x Connector 4 x...
HIGH OUTPUT IGN-1A INDUCTIVE COIL WITH BUILT-IN IGNITION MODULE
DESCRIPTION
INCLUDES: Matching plug and pins
Warning
All GMC Racing items that involve increases in power greater than those...
1/4" Mild Steel Weld-on Base Only
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for...
HALTECH Linear Position Sensor - 1" - 200mm Travel
DESCRIPTION
LENGTH: Between Mounting Holes (Closed) 327mm.
SUITS: All ECU's with spare AVI.
INCLUDES: 1 x Sensor, 1 x Opposing Connector Set....
HALTECH Elite 2500 + Terminated Harness Kit For Ford Falcon BA/BF Barra 4.0L I6 - Injector Connector: Factory Bosch EV1
DESCRIPTION
SUITS: Ford Barra Engine found in BA/BF Variants Barra 182,190,...
Haltech Elite CAN CableDTM-4 to 8 pin Black TycoLENGTH: 3000mm (120")
DESCRIPTION
LENGTH: 3000mm (120")
Warning
All GMC Racing items that involve increases in power greater than those required by...
HALTECH V8 Ford Small/Big Block 8 x IndividualHigh Output IGN-1A Inductive Coil and Harness Kit
DESCRIPTION
SUITS: A direct Plug 'n' Play solution to add 8 individual high output IGN-1A inductive...
HALTECH HALTECH Elite 2000/2500 Ignition Harness For Ford Barra 4.0 BA/BF
DESCRIPTION
SUITS: Ford Barra 4.0L BA/BF.
INCLUDES: Elite 2000/2500 Ignition Sub-Harness for Ford Barra.
NOTES: * Use with...
HALTECH V8 GM/Chrysler Hemi Small/Big Block 8 x IndividualHigh Output IGN-1A Inductive Coil and Harness Kit
DESCRIPTION
SUITS: A direct Plug 'n' Play solution to add 8 individual high output IGN-1A...
HALTECH Plug and Pins Only - Matching Set of Deutsch DTP-4 Connectors (25 Amp)
DESCRIPTION
INCLUDES: DTP 4P Kit 1 x DTP04-4P including wedge 1 x DTP06-4S including wedge 4 x 12/14AWG Female Pins 4...
This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle. Fully programmable systems allow you to extract all the performance from your engine.
