Haltech's Elite ECU series takes the art of engine calibration to a whole new level. Featuring a robust environmentally sealed waterproof case, drive by wire throttle control, intake and exhaust cam control, short term and long term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators the tools they need to get the job done right.
SUITS: Univeral 1-12 cylinder or 2-4 rotor applications.
INCLUDES: Elite 2500 ECU with DBW and Race Functions, USB programming cable, and USB Software Key.
NOTES: Ideal for popular late model performance racing applications. Recommended for 4, 6, 8 cylinder, Drive-By-Wire (DBW) or 2, 3, 4 rotor engines, EFI conversions, engines with multiple variable camshafts.
- 2 x Dedicated Engine Position Inputs with extensive trigger type support
- Up to 45 channels of Input & Output (I/O) expansion (via CAN)
- USB laptop communication (Windows)
- ESP Calibration Software - intuitive and easy to use
ECU functions
- Drive by Wire Throttle Control (DBW) - Requires (2) user defined outputs & (4) user defined inputs.
- Low Impedance Injector control with Programmable Injector Peak and Hold Currents & Programmable peak time.
- Flex Fuel Function (Direct sensor input) - Tune your engine's boost, fuel, and ignition by ethanol content.
- Flexible tuning setup for Petrol (Gasoline), LPG, Methanol, and Ethanol allows you to simply select your fuel type.
- Closed Loop O2 Control - Dual bank control for precise tuning (With optional external CAN O2 Wideband Controller Kit).
- Dual Channel Knock Control - Synchronized to engine position with high speed digital filtering for accurate detection.
- Variable cam control - Independently control up to 4 camshafts - Requires a minimum of 1 user defined input & output per variable cam.
- Closed Loop Idle Speed Control with learning for consistent idle stability. Requires 1 to 2 user defined outputs (BAC type) or 4 user defined output (Stepper motor type).
- Long term learning (Auto tune) on fuel, ignition, cam, boost & idle control maps (up to 4D).
- On-board data logging - Up to 40 channels of logging at sample rates up to 5ms (200Hz) with 2MB of internal memory.
- Laptop data logging - Data log all available channels directly to your laptop's hard drive for both tuning and diagnostics.
- Dual CAN Bus communication for Haltech Dashes and expansion devices. Supported OEM CAN & OBDII (view live engine data & set and clear diagnostics trouble codes).
- Injection Stages: up to 4 with individual injector flow rates per injector.
- 8 Injector drivers for 2 sequential stages on 4 cylinder & 3 rotor engines and up to 4 sequential stages on 2 rotor engines.
- Anti-Lag/Rotational idle for closed course racing, rally, circuit, or drift. Build and maintain boost during closed throttle conditions.
- Rolling Anti-Lag. Lock to your current (or pre-set) RPM or road speed for roll racing or pit lane limiting.
- Launch Control. Control your engine's power delivery, RPM & boost for consistent performance at the start line.
- Traction Control - Control your engine power output via mappable front vs rear axle or individual wheel speed slip.
- 2 x Dedicated Engine Position Inputs with extensive trigger type support
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HALTECH Plug and Pins Only - Matching Set of Deutsch DT-4 Connectors (DT06-4S + DT04-4P) - (13 Amp)
DESCRIPTION
INCLUDES: 1 x DT04-4P Connector 1 x DT06-4S Connector 2 x Wedge Locks to suit 8 x...
HALTECH 1/4" Open Tip Thermocouple
DESCRIPTION
LENGTH: 2.21m (87")SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier.INCLUDES: Mini K Type...
Plug’n’Play adapter harness kit for FORD FOCUS RS MK1 for HALTECH Elite 1500 ECU
DESCRIPTION
If you want to install the Haltech Elite 1500 ECU on your Ford Focus RS MK1, this is the right product...
HALTECH 1/4" Open Tip Thermocouple
DESCRIPTION
LENGTH: 1/4 " 0.61m (24")SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier.INCLUDES: Mini K Type...
HALTECH 4 Bar Motorsport MAP Sensor
DESCRIPTION
A Haltech MAP sensor (Manifold Absolute Pressure) provides instantaneous pressure information to the electronic control unit (ECU) from the intake...
HALTECH Elite 2000/2500 GM GEN III LS1 & LS6non DBW Terminated Harness
DESCRIPTION
SUITS: Factory EV1 injector connectors and common US style Delco/Bosch GM alternator connector. Pre-wired to...
HALTECH Linear Position Sensor - 1/2" - 150mm Travel
DESCRIPTION
LENGTH: Between Mounting Holes (Closed) 267mm.
SUITS: All ECU's with spare AVI.
INCLUDES: 1 x Sensor, 1 x Opposing Connector Set....
HALTECH Bosch 74mm Electronic Throttle Body - Includes connector and pins
DESCRIPTION
DIAMETER: 74mm
SUITS: Nexus and Elite VCU's and ECU's that support Drive by Wire Throttle Control (DBW)....