Haltech's Elite ECU series takes the art of engine calibration to a whole new level. Featuring a robust environmentally sealed waterproof case, drive by wire throttle control, intake and exhaust cam control, short term and long term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators the tools they need to get the job done right.
- 2 x Dedicated Engine Position Inputs with extensive trigger type support
- Up to 45 channels of Input & Output (I/O) expansion (via CAN)
- USB laptop communication (Windows)
- ESP Calibration Software - intuitive and easy to use
ECU functions
- Drive by Wire Throttle Control (DBW) - Requires (2) user defined outputs & (4) user defined inputs.
- Low Impedance Injector control with Programmable Injector Peak and Hold Currents & Programmable peak time.
- Flex Fuel Function (Direct sensor input) - Tune your engine's boost, fuel, and ignition by ethanol content.
- Flexible tuning setup for Petrol (Gasoline), LPG, Methanol, and Ethanol allows you to simply select your fuel type.
- Closed Loop O2 Control - Dual bank control for precise tuning (With optional external CAN O2 Wideband Controller Kit).
- Dual Channel Knock Control - Synchronized to engine position with high speed digital filtering for accurate detection.
- Variable cam control - Independently control up to 4 camshafts - Requires a minimum of 1 user defined input & output per variable cam.
- Closed Loop Idle Speed Control with learning for consistent idle stability. Requires 1 to 2 user defined outputs (BAC type) or 4 user defined output (Stepper motor type).
- Long term learning (Auto tune) on fuel, ignition, cam, boost & idle control maps (up to 4D).
- On-board data logging - Up to 40 channels of logging at sample rates up to 5ms (200Hz) with 2MB of internal memory.
- Laptop data logging - Data log all available channels directly to your laptop's hard drive for both tuning and diagnostics.
- Dual CAN Bus communication for Haltech Dashes and expansion devices. Supported OEM CAN & OBDII (view live engine data & set and clear diagnostics trouble codes).
- Injection Stages: up to 4 with individual injector flow rates per injector.
- 8 Injector drivers for 2 sequential stages on 4 cylinder & 3 rotor engines and up to 4 sequential stages on 2 rotor engines.
- Anti-Lag/Rotational idle for closed course racing, rally, circuit, or drift. Build and maintain boost during closed throttle conditions.
- Rolling Anti-Lag. Lock to your current (or pre-set) RPM or road speed for roll racing or pit lane limiting.
- Launch Control. Control your engine's power delivery, RPM & boost for consistent performance at the start line.
- Traction Control - Control your engine power output via mappable front vs rear axle or individual wheel speed slip.
- 2 x Dedicated Engine Position Inputs with extensive trigger type support
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-151301
Here you can add custom original content(text, images, videos and more) for each product page.
HALTECH Plug and Pins Only - Matching Set of Deutsch DTP-2 Connectors (25 Amp)
DESCRIPTION
INCLUDES: DTP 2P Kit 1 x DTP04-2P including wedge 1 x DTP06-2S including wedge 2 x 12/14AWG Female Pins 2...
HALTECH 1/4" Open Tip Thermocouple
DESCRIPTION
LENGTH: 1/4 " 1.52m (60")SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier.INCLUDES: Mini K Type...
Haltech CAN Cable8 pin Black Tyco to 8 pin Black TycoLENGTH: 3000mm (120")
DESCRIPTION
LENGTH: 3000mm (120")
Warning
All GMC Racing items that involve increases in power greater than those...
Dual Channel OEM Igniter (DUMB)
DESCRIPTION
INCLUDES: Mounting bracket, thermal paste and matching plug and pins.
Warning
All GMC Racing items that involve increases in power greater than those...
BOSCH 145 PSI FLUID PRESSURE AND TEMPERATURE SENSOR
DESCRIPTION
THREAD: M10 x 1.0INCLUDES: Includes: Matching plug and pins, M10 x 1.0 to 1/8NPT adaptor.NOTES: Used to measure fluid pressure and...
HALTECH 1/4" Open Tip Thermocouple
DESCRIPTION
1/4" Thermocouple 2.10m (82.5") long - Pre-terminated with Mini K Type connector to suit TCA 2 or 4 thermocouple amplifier.
LENGTH: 2.10m...
HALTECH Elite 550 Basic Universal Wire-in Harness
DESCRIPTION
LENGTH: 2.5m (8’)
NOTES: Does not include fuse and relay box.
Harness overview
Ideal for dedicated race cars, engine swaps, and custom...
M10 x 1.0 to 1/8 BSPT AdaptorTHREAD: M10 x 1.0 Female to 1/8BSPT Male
DESCRIPTION
THREAD: M10 x 1.0 Female to 1/8BSPT MaleSUITS: Bosch Fluid Pressure and Temperature Sensor - HT-010920INCLUDES:...
Haltech CAN Cable8 pin White Tyco to 8 pin White TycoLENGTH: 3600mm (144")
DESCRIPTION
LENGTH: 3600mm (144")
Warning
All GMC Racing items that involve increases in power greater than those...
HALTECH Plug and Pins Only - Matching Set of Deutsch DT-2 Connectors (DT06-8S + DT04-8P) - ( 13 Amp)
DESCRIPTION
INCLUDES: 1 x DT04-8P Connector 1 x DT06-8S Connector 2 x Wedge Locks to suit 16 x...
HALTECH Split Collar Shock Sensor Mount - 1" / 25.4mm
DESCRIPTION
LENGTH: N/A
SUITS: All Haltech Linear Position Sensors.
INCLUDES: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts.
NOTES:...
HALTECH Split Collar Shock Sensor Mount - 1 5/8" / 41.275mm
DESCRIPTION
LENGTH: N/A
SUITS: All Haltech Linear Position Sensors.
INCLUDES: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts....
HALTECH Elite 2500 + Terminated Engine Harness for Nissan RB Twin Cam With Series 1 (early) ignition type sub harness
DESCRIPTION
SUITS: Nissan RB Twin Cam RB20/25/26 with Series 1 Coils (External...