HALTECH Elite 1500 Mazda 13B S4/5 CAS with IGN-1A Ignition Terminated Harness INJECTOR CONNECTOR: Bosch EV1
€1,101.05
Tax included
This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle. Fully programmable systems allow you to extract all the performance from your engine.
HALTECH Elite 1000 Mazda 13B S4/5 CAS with IGN-1A Ignition Terminated Harness INJECTOR CONNECTOR: Bosch EV1
DESCRIPTION
INJECTOR CONNECTOR: Bosch EV1
SUITS: S4/5 CAS (Crank Angle Sensor) WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included).
INCLUDES: Engine harness with fuse block, firewall grommet and pre-wired High Output IGN-1A Inductive Coil (with built-in Ignitor) Ignition Harness.
NOTES: IGN-1A coils are NOT included. Please order 4 x HT-020114 if required.
ECU overview
The fastest and most cost effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this plug and Play product allows you to be up and running in just a few hours.
An efficient Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
High Output IGN-1A Coil Terminated Ignition Harness
The Haltech Mazda 13B Ignition Harness connects to the Haltech IGN-1A ignition coils.
Recommended as an add-on to the Elite 1000/1500 Terminated Engine Harness for Mazda 13B.
Warning
All GMC Racing items that involve increases in power greater than those required by the highway code of the country of the user, are intended only for competitive use. GMC Racing disclaims all liability for any use of the product contrary to national standards.
HT-140878
Here you can add custom original content(text, images, videos and more) for each product page.
HALTECH Plug and Pins Only - Matching Set of Deutsch DT-4 Connectors (DT06-4S + DT04-4P) - (13 Amp)
DESCRIPTION
INCLUDES: 1 x DT04-4P Connector 1 x DT06-4S Connector 2 x Wedge Locks to suit 8 x...
HALTECH Plug and Pins Only - Matching Set of Deutsch DTM-12 Connectors (7.5 Amp)
DESCRIPTION
INCLUDES: Male plug, Female Receptacle/Socket, Wedgelocks, Seals, Male & Female Pins.
Warning
All...
Haltech CAN Cable8 pin Black Tyco to 8 pin Black TycoLENGTH: 2400mm (92")
DESCRIPTION
LENGTH: 2400mm (92")
Warning
All GMC Racing items that involve increases in power greater than those required...
HALTECH Elite 1500 + Subaru WRX MY97-98 Plug'n'Play Adaptor Harness Kit
DESCRIPTION
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play...
Dual Channel OEM Igniter (DUMB)
DESCRIPTION
INCLUDES: Mounting bracket, thermal paste and matching plug and pins.
Warning
All GMC Racing items that involve increases in power greater than those...
HALTECH Nexus V8 IGN-1A Ford Harness
DESCRIPTION
SUITS: Plug and Play with Haltech Nexus R5 Universal V8 Terminated harness - HT-186200
Warning
All GMC Racing items that involve increases in power...
HPI4 - High Power Igniter - 15 Amp Quad ChannelFlying Lead KitLENGTH: 2.0m (78")
DESCRIPTION
The Haltech High Power Igniter is capable of driving up to 15 Amps per channel, allowing ignition...
GPS SPEED INPUT MODULE - LENGTH: 300mm
DESCRIPTION
TMS-4 OVERVIEWThe TMS-4 can fire several optional trouble codes, including:
Pressure High / Pressure Low
Temperature High
Air Leak Detected...
HALTECH 1/4" Open Tip Thermocouple
DESCRIPTION
1/4" Thermocouple 2.10m (82.5") long - Pre-terminated with Mini K Type connector to suit TCA 2 or 4 thermocouple amplifier.
LENGTH: 2.10m...
HALTECH Split Collar Shock Sensor Mount - 1 1/4" / 31.75mm
DESCRIPTION
LENGTH: N/A
SUITS: All Haltech Linear Position Sensors.
INCLUDES: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts....
"Red" Single Channel Hall Effect SensorTHREAD: M12x1.0
DESCRIPTION
THREAD: M12x1.0SUITS: Wheel Speed, Crank/Cam etc.INCLUDES: Matching set of Deutsch DTM 3 connectors (HT-031014)
Warning
All GMC...